Buying guides

Which bottle jack?

Which bottle jack?

Short answer: Three bottle jacks. QJD-030S-02 is a hydraulic hand pump, not air. The table says 30 T and the capacity is 30 T. The title says 30000 kg. The lift range is 285–475 mm. The size is 170 × 135 × 285 mm. The net weight with the accessories is 15.8 kg. The handle is three-piece. The temperature −10.6–60.0 °C is this page’s row. The page’s note says the overload valve is not to be adjusted. MR8004 is air and hand. The table says a rated load of 20000 kg/20 t and a capacity of 20 T. The text says up to a 20-tonne jack and, in brackets, 20.0 kg. 20 t and 20.0 kg both stay. The lift is 260–495 mm. The adjustment screw is 65 mm. The pressure is 0.9–1.2 MPa. The quick coupling is the EU type. The weight is 13.5 kg. MR8008 is also air and hand. The table says 50001 kg/50 t and a capacity of 50 T. The title says 50001 kg. The text says up to a 50-tonne jack and, in brackets, 110 105 kg. Those figures stay. The lift is 265–410 mm. The weight is 29.7 kg. The pressure is also 0.9–1.2 MPa. A 65 mm screw is not there. A wheel and a built-in handle are only here.

The tonne and the kilogram in brackets

The 30-tonne page does not put a bracket that would be a second number. The title is 30000 kg. The table is 30 T, and the capacity is 30 T. Those are the title and the table. There is no bracket kilogram sitting after the 30 T. 30000 kg stays the title. 30 T stays the table and the capacity. QJD-030S-02 is the hand pump that carries those writings. Nothing on that page adds a second load figure in brackets.

MR8004’s table is 20000 kg/20 t. The capacity on that table is 20 T. The same page’s text puts a bracket after the 20 tonnes, and the bracket is 20.0 kg. 20000 kg and 20.0 kg are not one row. 20 t and 20.0 kg both stay. The rated-load cell keeps 20000 kg/20 t, with the lowercase t written in that cell. The capacity keeps 20 T. The text keeps “up to a 20-tonne” and then 20.0 kg in brackets. The bracket is not a rewriting of 20000 kg, and 20000 kg is not a rewriting of 20.0 kg. The jack’s own weight on this page is a different figure again, 13.5 kg, and that weight is not the bracket.

MR8008’s table is 50001 kg/50 t. 50001 kg and 50 t are written in one cell. The capacity is 50 T. The title says 50001 kg. The text puts a bracket after the 50 tonnes, and the bracket is 110 105 kg, printed with a space between 110 and 105. 50001 kg, 50 t and 110 105 kg stay as three writings. The cell does not absorb the bracket. The bracket does not replace 50001 kg, and it does not replace 50 t. 50001 stays 50001. The jack’s own weight on this page is 29.7 kg, which is not the bracket and not the 50001 kg in the load cell.

The highest tonne is not the highest lift. 50 T ends at 410 mm. 20 T ends at 495 mm. 30 T ends at 475 mm. The lowest start is on the 20 T page, 260 mm. 50 T starts at 265 mm. 30 T starts at 285 mm. 495 mm in the title is MR8004’s lift upper limit, not the length of the jack on its own. 410 mm in the title is MR8008’s upper limit. The 30 T title is 30000 kg, not a millimetre. The 20 T title is 495 mm, not a tonne.

Air is on two, and a hand pump is on all of them

QJD-030S-02 does not name air, a megapascal, or a quick coupling. The lift type on that page is a medium-sized lift. The handle is three-piece. Those sentences stay on the 30 T page. Air is not added to it. A pressure is not added to it. A coupling is not added to it. MR8004 and MR8008 say a pneumatic mode, and they say hand when there is no air. The pressure 0.9–1.2 MPa is on both of those pages. It is the same written range on MR8004 and on MR8008. It is not a range on QJD-030S-02. The page does not write how many bar 0.9 MPa is. MPa stays MPa.

An EU-type quick coupling is only in the MR8004 table. MR8008’s text says a standard quick coupling, and the connection type is not in that table. “Standard” in the MR8008 text is not the EU type from the MR8004 table. The 30 T page has neither writing. The air fitting stays where the page puts it: EU type in the MR8004 table, a standard quick coupling in the MR8008 text with no type in the table, and no fitting on the hand pump.

The 65 mm screw is only MR8004. It is an adjustment screw of 65 mm. The double spring that returns the piston is only that text’s sentence, on MR8004. The other two pages do not have the 65 mm row, and they do not have that double-spring sentence. MR8008 says a built-in handle and wheels. The other two do not have a wheel. The three-piece handle stays on QJD-030S-02. The built-in handle stays on MR8008. They are not one handle moved from page to page.

The overload-valve warning “do not adjust” is only on the 30 T page. The two air jacks have a valve in the text, and they do not have that prohibition. The note is not copied onto MR8004 or MR8008. The valve sentence on the air pages is not the 30 T note. This guide does not turn any of those sentences into a way of lifting a car. The sentences stay as location: a “do not adjust” note on the 30 T overload valve, and a valve in the text of the two air pages without that note.

Material is two rows on two pages

MR8004’s text says an aluminium-alloy cylinder. MR8004’s table says cast iron and carbon steel. Both rows stay. The text does not replace the table, and the table does not replace the text. MR8008’s text says an aluminium cylinder, not the alloy wording used on MR8004. MR8008’s table also says cast iron and carbon steel. Both of those rows stay as well. The aluminium-alloy sentence belongs to MR8004’s text. The aluminium-cylinder sentence belongs to MR8008’s text. Cast iron and carbon steel belong to the tables of those two pages.

QJD-030S-02 says precision welding and an industrial material. It does not name cast iron, and it does not name aluminium. Those metal names are not added to the 30 T page. Welding and an industrial material are not added to the two air pages as a substitute for the rows those pages already have. The colour red is on the two air jacks. The 30 T page has no colour row. Red is not written onto QJD-030S-02.

The temperature −10.6–60.0 °C is only on the 30 T page. The air jacks say the oil does not freeze and the seal does not show, without giving a degree. That sentence is not raised to −10.6. −10.6–60.0 °C is not written onto MR8004 or MR8008. The oil-and-seal sentence is not written onto the 30 T page in place of the degree row. No degree is inferred from “does not freeze”.

The jack’s own weight stays on its own row, separate from the tonne and from the bracket. 13.5 kg is the 20 T jack. 15.8 kg is the 30 T net with the accessories. 29.7 kg is the 50 T jack. Lighter weight and smaller tonne are not one row. The 20 T jack is lighter than the 30 T jack. 13.5 kg is not 20.0 kg, and 20.0 kg is the bracket after the 20 tonnes, not the weight of the jack. 29.7 kg is not 110 105 kg, and 110 105 kg is the bracket after the 50 tonnes, not the weight of the jack. 15.8 kg keeps the words “with the accessories”. The other two weights are not given those words.

Size and the box

170 × 135 × 285 mm is the 30 T jack. 235 × 155 × 260 mm is the 20 T jack. 395 × 230 × 265 mm is the 50 T jack. The lowest body-height figure is on the 20 T page, 260 mm, and that is also the lift start. The 30 T size’s height, 285 mm, is also the lift start. The 50 T size’s height, 265 mm, is also the lift start. The page does not say that the third figure of the size and the start of the lift are always the same thing. The figures simply coincide on these three pages. 495 mm is not among those body sizes. It remains MR8004’s lift upper limit. The MR8004 body size is 235 × 155 × 260 mm.

The boxes are 38.0 × 22.0 × 25.0 cm, 33.0 × 23.0 × 28.0 cm and 32.5 × 28.5 × 46.0 cm. The page lists those three boxes and does not write which box belongs to which model, so this guide does not assign them. A box is not the lift, not the body size, and not the weight. An oil grade is not written. A hose length is not written. A bar figure for 0.9 MPa is not written. MPa stays MPa on the two air pages, and it stays absent on the 30 T page.

How to choose?

If the pump is hand only, the lift is 285–475 mm, and the page says 30 T and 30000 kg, it is QJD-030S-02. The net with the accessories is 15.8 kg. The temperature is written, −10.6–60.0 °C. There is no air, no megapascal and no quick coupling. The lift type is a medium-sized lift. The handle is three-piece. The size is 170 × 135 × 285 mm. The page names precision welding and an industrial material, and it does not name cast iron or aluminium. There is no colour row. There is no wheel, no 65 mm screw and no double-spring sentence. The overload valve carries the note not to adjust it. The table’s 30 T and the capacity’s 30 T stay, and there is no bracket kilogram after them. The title stays 30000 kg.

If there is air and hand, the table is 20000 kg/20 t, the lift goes up to 495 mm, and the screw is 65 mm, it is MR8004. The text puts 20.0 kg in brackets after the 20 tonnes. The jack’s weight is 13.5 kg. The EU quick coupling is in the table. The pressure is 0.9–1.2 MPa. The capacity is 20 T. The size is 235 × 155 × 260 mm. The text says an aluminium-alloy cylinder, and the table says cast iron and carbon steel. The colour is red. The double spring that returns the piston is this text’s sentence. There is no wheel and no built-in handle. A valve is in the text, without the “do not adjust” note. There is no degree row. The oil-and-seal sentence gives no degree. 495 mm is the top of the lift, not the body length. 20.0 kg is not 20 t, and it is not 13.5 kg.

If the table says 50001 kg/50 t and the lift ends at 410 mm, it is MR8008. The text puts 110 105 kg in brackets after the 50 tonnes. The weight is 29.7 kg. There are wheels, and the handle is built in. A 65 mm screw is not there, and the double-spring sentence is not there. The pressure is 0.9–1.2 MPa. The capacity is 50 T. The title is 50001 kg. The size is 395 × 230 × 265 mm. The text says an aluminium cylinder, and the table says cast iron and carbon steel. The colour is red. The text says a standard quick coupling, and the table does not give the connection type. A valve is in the text, without the “do not adjust” note. There is no degree row. 410 mm is the upper limit in the title and the end of the lift. 110 105 kg is not 50 t, and it is not 29.7 kg.

20.0 kg is not 20 t. 110 105 kg is not 50 t. 410 mm is not the highest lift. The highest lift on these pages is 495 mm, on MR8004. The 30 T lift ends at 475 mm. The hand pump is the only page with a temperature in degrees, a three-piece handle, and the note not to adjust the overload valve. The wheels and the built-in handle are only on MR8008. The EU-type coupling and the 65 mm screw are only on MR8004.

Comparison

Product Price What sets it apart
Bottle 30 T, hand, 285–475 mm 98,90 € 30000 kg, −10.6–60 °C, no air
Bottle 20 T, air, 20.0 kg in brackets 143,90 € 260–495 mm, screw 65 mm, EU fitting
Bottle 50 T, air, 110 105 kg in brackets 370,90 € 50001 kg/50 t, 265–410 mm, wheels

The price in the link is the shop’s current price and opens the product.

Who is this not for?

  • 20 tonnes and 20.0 kg in brackets both stay. 20000 kg is the table’s other writing.
  • 50 tonnes, 50001 kg and 110 105 kg in brackets stay as three.
  • The highest lift is 495 mm, on the 20 T page. 50 T ends at 410 mm.
  • Air and 0.9–1.2 MPa are not on the 30 T page.

Frequently asked questions

How many tonnes?

The table says 30 T, 20 T and 50 T. The titles say 30000 kg and 50001 kg. The 20 T title is 495 mm, not a tonne. QJD-030S-02 keeps 30 T in the table and 30 T as the capacity, with 30000 kg in the title and no bracket kilogram. MR8004 keeps a rated load of 20000 kg/20 t and a capacity of 20 T, and the text still adds 20.0 kg in brackets. MR8008 keeps 50001 kg/50 t in one cell and a capacity of 50 T, with 50001 kg in the title, and the text still adds 110 105 kg in brackets. The tonne symbols do not erase the title figures, and the title figures do not erase the brackets.

What is 20.0 kg in the brackets?

MR8004’s text puts 20.0 kg after the 20 tonnes. The table says 20000 kg/20 t. Both stay. 20.0 kg is one writing. 20000 kg/20 t is another. The capacity 20 T stays as well. 20.0 kg is not the jack’s own weight. That weight is 13.5 kg. The bracket is not moved onto QJD-030S-02, which has no bracket, and it is not moved onto MR8008, whose bracket is 110 105 kg.

What is 110 105 kg in the brackets?

MR8008’s text puts 110 105 kg after the 50 tonnes. The table says 50001 kg/50 t. Three writings stay: 50001 kg, 50 t, and 110 105 kg. The space in 110 105 kg stays as printed. The figure is not the jack’s own weight. That weight is 29.7 kg. The bracket is not moved onto MR8004, whose bracket is 20.0 kg, and it is not added to the 30 T page, which has no bracket.

Are all of them air?

No. Air is MR8004 and MR8008. QJD-030S-02 is a hand pump. It has no pressure. The two air pages say a pneumatic mode and hand when there is no air. The hand pump does not name air, a megapascal, or a quick coupling. 0.9–1.2 MPa stays on the two air pages only. The lift type “medium-sized lift” stays on the hand pump only.

What is the pressure?

0.9–1.2 MPa is on the two air jacks. The 30 T page has no MPa. MR8004 and MR8008 write the same pressure range. The page does not convert 0.9 MPa into bar, and this guide does not add that conversion. The pressure is not the lift, not the screw and not the weight. QJD-030S-02 still has no pressure row.

How high does it lift?

285–475 mm, 260–495 mm and 265–410 mm. The 50 T upper limit is the lowest of the three. 495 mm is the highest upper limit, and it belongs to the 20 T page, MR8004. 475 mm is the 30 T upper limit. 410 mm is the 50 T upper limit. The starts are 285 mm, 260 mm and 265 mm. The lowest start is 260 mm, on the same page whose lift ends at 495 mm. Lift height stays on these rows. It is not the body size, except that on these three pages the third size figure happens to match the lift start, which the page does not turn into a general rule.

Does every jack have the screw?

The 65 mm screw is only MR8004. The other two do not have that row. The double spring that returns the piston is only the MR8004 sentence that says it. QJD-030S-02 has a three-piece handle and no 65 mm screw. MR8008 has a built-in handle and wheels, and no 65 mm screw. The screw is not a lift figure and not a body figure.

Does every jack have a wheel?

No. Wheels and a built-in handle are only on MR8008. QJD-030S-02 has a three-piece handle and no wheel. MR8004 has the 65 mm adjustment screw and no wheel. The wheel is not added to the lighter jacks, and the built-in handle is not the three-piece handle.

What is the material?

The two air texts name aluminium, and the tables name cast iron and carbon steel. MR8004’s text says an aluminium-alloy cylinder. MR8008’s text says an aluminium cylinder. The 30 T page names welding and an industrial material, without giving a metal grade. Cast iron, carbon steel and aluminium are not written onto QJD-030S-02. Red is the colour on the two air pages only. The 30 T page has no colour row.

What is the temperature?

−10.6–60.0 °C is only on the 30 T page. The others say the oil does not freeze, without a degree. That sentence is not turned into −10.6. The air pages also say the seal does not show, still without a degree. The degree row stays on QJD-030S-02. The comparison line writes −10.6–60 °C for that same 30 T page, and the degree row in the body writes −10.6–60.0 °C. Neither writing is moved onto MR8004 or MR8008.

How heavy is the jack itself?

13.5 kg, 15.8 kg with the accessories, and 29.7 kg. Of these, the 20 T jack is lighter than the 30 T jack. 13.5 kg is MR8004’s own weight. 15.8 kg is QJD-030S-02’s net with the accessories, and the accessories stay in that phrase. 29.7 kg is MR8008’s own weight. None of these is the bracket. 20.0 kg is the MR8004 load bracket. 110 105 kg is the MR8008 load bracket. 30000 kg, 20000 kg and 50001 kg are load writings, not the weight of the jack.

What fitting does the air use?

The EU type is only in the MR8004 table. MR8008’s text says a standard quick coupling, and the type is not in the table. QJD-030S-02 has no quick coupling, because that page does not name air. The EU type is not copied into the MR8008 table. “Standard” is not copied into the MR8004 table as a replacement for the EU type. The fitting is not the pressure. The pressure on both air pages remains 0.9–1.2 MPa.

May the valve be turned?

“Do not adjust” is only the note on the 30 T page, on the overload valve. The other two have a valve in the text, and they do not have that sentence. The note is not a pressure, not a screw and not a lift. This guide does not add a procedure for turning a valve, and it does not describe jacking a car. The air pages keep a valve in the text without the prohibition. The 30 T page keeps the prohibition.

Is 495 mm the body length?

No. 495 mm is MR8004’s lift upper limit, and it is the figure in that title. The body size is 235 × 155 × 260 mm. 260 mm is the start of that lift, and it is the third figure of that size. 495 mm is the end of the lift. It is not a body length, and it is not the body length of the 30 T jack or the 50 T jack. Those lifts end at 475 mm and 410 mm. Their body sizes are 170 × 135 × 285 mm and 395 × 230 × 265 mm.

Author: the mano.ee team. A price in this guide is the current shop price and links to the product. Delivery across the Baltics, usually 4–10 days.