Short answer: Three wood lathes, and none of them is 1/2 HP or 1 HP. The WL0813 text says 1/3 HP and 250 W. The table has no horsepower row and no watt row. Swing over the bed is 200 mm. The distance between centres is 330 mm. The text writes 20.3 × 33.0 cm. 20.3 cm is not the page’s writing of 200 mm, and 33.0 cm does not replace the 330 mm row. Speed is 150–3200, in the text as r/min and in the table as RPM. The tool rest is 150 mm. Weight is 18.2 kg. The WL1218 text says 3/4 HP and 560 W. The table does not have that row. Swing is 304 mm and the centres are 465 mm. The text writes 30.5 × 45.7 cm. 304 mm is not 30.5 cm on the page, and 465 mm is not 45.7 cm. Speed is five numbers: 650, 1100, 1600, 2200 and 3200. The rest is also 150 mm. Weight is 29.2 kg. The WL1640 table says a spindle power of 2.0 hp/1500 W and a separate power of 1500 W. The text says 2 HP/1500 W. Swing is 406 mm. The text says a work surface of 45.7 × 102 cm and of 457 × 1020 mm. 406 mm and 457 mm both stay. The centres are 1020 mm. Speed is 0–3200. Weight is 146 kg.
Products in this guide
WL0813, text 1/3 HP, swing 200 mm292,90 €View →
WL1218, text 3/4 HP, five speeds445,90 €View →
WL1640, 2 HP and 406 mm and 457 mm2 908,90 €View →
Power is in the text, and the first two tables have no such row
The WL0813 table and the WL1218 table carry voltage, swing, centres, speed, the rest, the package and the weight. Horsepower and watts are not repeated there. 1/3 HP and 250 W are writings in the title and the text of WL0813. 3/4 HP and 560 W are writings in the title and the text of WL1218. 1/2 HP is not among those writings. 1 HP is not among those writings. A watt figure on these two cards stays in the title and the text. It is not copied down into a table row the page does not have.
WL1640 writes power in the table twice. One row is spindle power, 2.0 hp/1500 W. Another row is power, 1500 W. The text writes 2 HP/1500 W. The row that is named voltage/power has a value of AC 220 V 50 Hz only, with no watts in that value. The watts sit on the two other rows. 2 HP is a different writing from 1 HP, and this guide has no 1 HP card. 2.0 hp does not erase the text’s 2 HP. Both horsepower writings stay on this one page, next to 1500 W, and they are not moved onto WL0813 or WL1218.
The three cards are 1/3 HP, 3/4 HP and 2 HP. Watts are printed where the page prints them: 250 W in the WL0813 text, 560 W in the WL1218 text, and 1500 W in the WL1640 text and in the two WL1640 power rows. The first two tables do not gain a watt row from the third page. The third page does not lose its table watts because the first two keep watts in the text only.
200 mm and 20.3 cm, and 304 mm and 30.5 cm, stay as different writings
On the small lathe the swing is 200 mm and the distance between centres is 330 mm. The text measure is 20.3 × 33.0 cm. The page writes the millimetre pair in the table and the centimetre pair in the text, and it does not convert 200 mm into 20.3 cm. 33.0 cm does not stand in for the 330 mm row. A reader who keeps one pair and drops the other is joining two lines the page leaves apart. Swing over the bed and the distance between centres are already two different rows, and the centimetre line is a third writing, not a replacement for either row.
On the middle lathe the swing is 304 mm and the centres are 465 mm. The text measure is 30.5 × 45.7 cm. The page does not write 304 mm as 30.5 cm, and it does not write 465 mm as 45.7 cm. 30.5 cm stays in the text. 304 mm stays in the table. 45.7 cm stays beside 30.5 cm in that text measure. 465 mm stays as the centres row. None of those four figures is asked to erase another.
On the large lathe the swing is 406 mm. The text says a work surface of 457 × 1020 mm and of 45.7 × 102 cm. 406 mm and 457 mm both stay. They are not one diameter written two ways. The centres row is 1020 mm, and that row is this page’s length row. It is not the swing row. 1020 mm also appears inside the work-surface writing 457 × 1020 mm, and the page still does not join that writing to the 406 mm swing. The centimetre work surface, 45.7 × 102 cm, stays as its own line next to 457 × 1020 mm.
The tool rest of 150 mm is on the two smaller lathes only, and it is the same number on both, while the swing is 200 mm on one and 304 mm on the other. The rest length does not follow the swing. WL1640 has no rest-length row, so 150 mm is not placed on the large card. The large card’s length figure remains the 1020 mm centres row, beside the 406 mm swing and the 457 mm work-surface figure.
150–3200, five speeds and 0–3200 are not one knob
WL0813 is a variable speed, 150–3200. The low end is 150. It is not 0. The text gives that range in r/min. The table gives that range in RPM. The two unit labels stay on the lines that use them. This card does not become a five-speed machine, and it does not borrow a zero from the large lathe.
WL1218 is not a range. It is five separate speeds, written with slashes as 650/1100/1600/2200/3200. The text lists those same numbers in r/min. There is no single low-to-high span on this card, and there is no zero. The lowest of the five is 650. The highest of the five is 3200. 3200 is the upper number on all three lathes. The lower number is not 0 on all three, and on this card the lower number is 650, stated as its own speed rather than as the start of a sweep.
The WL1640 table is 0–3200 RPM. The text says a maximum of 3200 r/min, and a range from 0 to 3200 r/min, and that the speed is not adjusted by hand. The 0 stays at the start of that range. A brushless DC motor is a sentence on this page. The voltage row on the same page is still AC 220 V 50 Hz. The motor sentence and the voltage row both stay. WL0813 and WL1218 do not have a brushless-motor sentence, so that sentence is not copied onto them. Their speed lines stay 150–3200 and the five speeds. 0–3200 is the large lathe’s range only.
Protection, material and weight
WL0813 names protection as a printed circuit board with overcurrent protection. WL1218 names protection as a motor with thermal protection that switches off when it overheats. WL1640 does not write those two sentences. Adjustable feet are only on the large lathe. A vertical type is only on the large lathe. The first two say a metal frame. The large one says cast iron HT150. The metal-frame sentence is not replaced by HT150 on the smaller cards, and HT150 is not added to them.
The weights are 18.2 kg, 29.2 kg and 146 kg. The large lathe’s package has 146 cm as its third figure. 146 kg and 146 cm are different units, and neither erases the other. The packages are 24.0 × 38.0 × 72.0 cm, 30.5 × 46.0 × 86.0 cm and 62.0 × 49.5 × 146 cm. Those package lines are not the swing, not the centres, and not the text measures 20.3 × 33.0 cm, 30.5 × 45.7 cm and 45.7 × 102 cm. The 30.5 that opens the middle package is a package figure. It is not asked to settle the separate question of the middle lathe’s 30.5 cm text and 304 mm swing.
Voltage on all three is 220 V and 50 Hz. On the large lathe the row is named voltage/power, and the value in that row is only the voltage and the frequency. Noise in decibels is not on these pages. There is no list of the fittings, although a sentence that a kit is included is on all three. The kit sentence does not grow into a list the pages do not print.
How to choose?
If the text says 1/3 HP and 250 W, the swing is 200 mm, the centres are 330 mm and the speed is 150–3200, that is WL0813. The text also writes 20.3 × 33.0 cm. The weight is 18.2 kg. The rest is 150 mm. The table has no watts. Protection on this card is the printed circuit board with overcurrent protection. The frame sentence is a metal frame. The low speed is 150, in r/min in the text and in RPM in the table.
If the text says 3/4 HP and 560 W, the swing is 304 mm, the centres are 465 mm and the speed is five speeds, that is WL1218. The text writes 30.5 × 45.7 cm. The weight is 29.2 kg. The rest is also 150 mm. The five speeds are 650, 1100, 1600, 2200 and 3200, listed in the text in r/min and written with slashes as 650/1100/1600/2200/3200. Protection on this card is thermal protection that switches off on overheating. The frame sentence is a metal frame. The table, as on the smaller lathe, has no horsepower row and no watt row.
If the page says 2 HP, 2.0 hp and 1500 W, the swing is 406 mm and the centres are 1020 mm, that is WL1640. The text also writes 457 × 1020 mm and 45.7 × 102 cm. The speed starts at zero: the table is 0–3200 RPM, and the text says a maximum of 3200 r/min and a range from 0 to 3200 r/min, not adjusted by hand. The weight is 146 kg. The material is cast iron HT150. Adjustable feet and a vertical type are on this card. A brushless DC motor is this card’s sentence, and the voltage value remains AC 220 V 50 Hz.
1/2 HP is not on any of these pages. 1 HP is not on any of these pages. 406 mm does not erase 457 mm. 20.3 cm does not erase 200 mm. 30.5 cm does not erase 304 mm. 45.7 cm on the middle lathe does not erase 465 mm. The 150 mm rest stays on the two smaller cards. The zero at the bottom of the speed range stays on WL1640.
Comparison
| Product | Price | What sets it apart |
|---|---|---|
| WL0813, text 1/3 HP, swing 200 mm | 292,90 € | 150–3200, 18.2 kg, rest 150 mm |
| WL1218, text 3/4 HP, five speeds | 445,90 € | 560 W in the text, 29.2 kg, thermal protection |
| WL1640, 2 HP and 406 mm and 457 mm | 2 908,90 € | 0–3200, 146 kg, cast iron HT150 |
The price in the link is the shop’s current price and opens the product.
Who is this not for?
- 1/2 HP and 1 HP are not here. The writings are 1/3 HP, 3/4 HP, and 2 HP and 2.0 hp.
- 20.3 cm does not replace 200 mm. 30.5 cm does not replace 304 mm. 45.7 cm does not replace 465 mm.
- The 406 mm swing and the 457 mm work surface both stay. 0–3200 is not 150–3200.
- 146 kg and the package’s 146 cm are different units. The first two tables have no power row.
Frequently asked questions
Is there a 1/2 HP or a 1 HP here?
No. WL0813 is 1/3 HP and 250 W in the text. WL1218 is 3/4 HP and 560 W in the text. WL1640 is 2 HP, 2.0 hp and 1500 W.
Are the watts in the table on every lathe?
No. On the first two, the watts are only in the text. The WL1640 table has 2.0 hp/1500 W and a separate 1500 W.
How long a piece fits?
The distance between centres is 330 mm, 465 mm or 1020 mm. That is the length row. Swing is separate: 200 mm, 304 mm or 406 mm.
Is 20.3 cm the same as 200 mm?
The page writes both and does not convert one into the other. 20.3 × 33.0 cm is the text. 200 mm and 330 mm are the table.
Is 30.5 cm the same as 304 mm?
It is not a conversion the page makes. The text is 30.5 × 45.7 cm. The table is 304 mm and 465 mm.
Why does the large lathe have both 406 mm and 457 mm?
The swing is 406 mm. The work surface in the text is 457 × 1020 mm and 45.7 × 102 cm. The centres are 1020 mm. The page does not join these into one figure.
What speed does each lathe have?
WL0813 is 150–3200. WL1218 is five speeds, not a range. WL1640 is 0–3200, and the text also states a maximum of 3200.
Is the low speed zero on every lathe?
No. Zero is only the start of the WL1640 range. WL0813 starts at 150. The lowest WL1218 speed is 650.
What unit is the speed written in?
The text writes r/min. The table writes RPM. Both stay on the lines that use them.
Is the motor brushless on every lathe?
No. A brushless DC motor is only a sentence on WL1640. The voltage row on that page is still AC 220 V 50 Hz.
What protection does each lathe name?
WL0813 has a printed circuit board with overcurrent protection. WL1218 has thermal protection that switches off when it overheats. WL1640 does not write those sentences.
What material does each lathe name?
The first two say a metal frame. WL1640 says cast iron HT150 and a vertical type. Adjustable feet are only on the large lathe.
Is the rest 150 mm on every lathe?
No. 150 mm is WL0813 and WL1218. WL1640 has no rest-length row.
Which lathe is the heaviest?
WL1640 is 146 kg. WL1218 is 29.2 kg. WL0813 is 18.2 kg. The package’s 146 cm is not 146 kg.
Is the voltage the same?
All three are 220 V and 50 Hz. On the large lathe the row is named voltage/power, and the value is only the voltage and the frequency.