Short answer: Three submersible pumps, and the 1100 W that was in an old title is not on any page. QSB-2JH-55051-F is 550 W and 0.75 hp. The amps are 1.5 A. The voltage is 230 V 50 Hz. The maximum lift is 7.5 m. The title writes 10 m, and the cord row is 10 m. 10 m is not the lift. The text says up to 9500 litres an hour. The table says 41.7 gallons a minute and 158 l/min. The page does not convert these. This is the only one that says clean water only, and draining down to 1.1 cm. The weight is 5.5 kg. QSB-2JH-1300B69 is 1300 W and 1.75 hp. The amps are 4.9 A. The voltage is also 230 V 50 Hz. The lift is 11 m. The title’s 10 m is again the cord, not the lift. The text says up to 20 000 litres an hour. The table says 88 gallons a minute and 333.3 l/min. Clean and dirty water. Solid particles up to 3.5 cm. The weight is 8.6 kg. WSD55-18-2,2B(A) is 2200 W and 3 hp. The amps are 10 A. The voltage is 220–240 V and 50/60 Hz, not 230 V 50 Hz. The lift is 18 m. The title’s 8 m is the cord. The text says up to 60 000 litres an hour. The table says 264 gallons a minute and 1000 l/min. Particles up to 2 cm, smaller than on the 1300 W pump. The weight is 24.4 kg.
Products in this guide
550 W, lift 7.5 m, cord 10 m, clean water98,90 €View →
1300 W, lift 11 m, particle 3.5 cm155,90 €View →
2200 W, lift 18 m, cord 8 m, particle 2 cm305,90 €View →
1100 W is not on the page
The powers are 550 W and 0.75 hp, 1300 W and 1.75 hp, and 2200 W and 3 hp. 1100 W is not there. The choice on these cards is 550 W, 1300 W and 2200 W. It is not a choice of 1100 W or 2200 W. The old title’s 1100 W is not a row on QSB-2JH-55051-F, not a row on QSB-2JH-1300B69, and not a row on WSD55-18-2,2B(A). Each card keeps the watt figure it writes, together with the horsepower it writes. 0.75 hp stays with 550 W. 1.75 hp stays with 1300 W. 3 hp stays with 2200 W. The page does not replace any of those pairs with 1100 W.
The page does not multiply the amps by the voltage. 1.5 A, 4.9 A and 10 A stay on their own rows. 1.5 A is the 550 W card. 4.9 A is the 1300 W card. 10 A is the 2200 W card. Those amp rows are not a second way of writing the watts, and this guide does not multiply them into a watt figure. The watt row remains the watt row. The amp row remains the amp row.
The 1300 W pump and the 2200 W pump have a power row and a separate motor-power row, the same written number. On the 1300 W card both of those rows write 1300 W. On the 2200 W card both of those rows write 2200 W. The 550 W pump does not have a motor-power row. The repeated number is not a second, different wattage. It is the same written number on two rows, and only on the two cards that have both rows. QSB-2JH-55051-F has the 550 W power writing and 0.75 hp, and it does not add a motor-power row.
The voltage on the 550 W pump and the 1300 W pump is 230 V 50 Hz. The voltage on the 2200 W pump is 220–240 V 50/60 Hz. These are not one plug description. 230 V 50 Hz stays on the first two cards. 220–240 V and 50/60 Hz stay on WSD55-18-2,2B(A). The page does not rewrite the 2200 W card as 230 V 50 Hz, and it does not rewrite the first two cards as 220–240 V 50/60 Hz. The water temperature is 0–35 °C on the first two, and 0–40 °C on the 2200 W pump. 0–35 °C stays with 550 W and 1300 W. 0–40 °C stays with 2200 W. The temperature row is not one shared ceiling.
10 m and 8 m are the cord, and lift is another row
The 550 W title writes 10 m. The lift row is 7.5 m. The cord row is 10 m. 10 m is not the lift. The 1300 W title also writes 10 m. The lift is 11 m. The cord is 10 m. The 2200 W title writes 8 m. The lift is 18 m. The cord is 8 m. The highest lift has the shortest cord. 18 m of lift is on the card whose cord is 8 m. 7.5 m of lift is on a card whose cord is 10 m. 11 m of lift is on the other card whose cord is 10 m. The title metre follows the cord row. It does not follow the lift row. A title that says 10 m is the cord length on that page. A title that says 8 m is the cord length on that page. The lift figures stay 7.5 m, 11 m and 18 m, each on its own card.
The text’s hours and the table’s minutes both stay. The 550 W text says up to 9500 litres an hour. That hour line stays. The 550 W table says 41.7 gallons a minute and 158 l/min. That table line stays. The page does not convert one into the other. The 1300 W text says up to 20 000 litres an hour. The 1300 W table says 88 gallons a minute and 333.3 l/min. The page does not convert those either. The 2200 W text says up to 60 000 litres an hour. The 2200 W table says 264 gallons a minute and 1000 l/min. The page does not convert those either. The gallons stay: 41.7, 88 and 264 gallons a minute. The page does not write that one number is a conversion of another. Each hour figure stays in its text. Each minute figure stays in its table.
Clean water and particles do not step with the wattage
The 550 W page says clean water. The words dirty water are not on that page. Draining down to 1.1 cm is only there. A particle diameter is not there. The residual depth of 1.1 cm belongs to QSB-2JH-55051-F. It is not written onto the 1300 W card or the 2200 W card. Clean water only is the water line on the 550 W page. Dirty water is not added to it. The absence of a particle diameter stays an absence on that card. 550 W is not given 3.5 cm, and it is not given 2 cm.
The 1300 W page and the 2200 W page say clean and dirty water. They do not have 1.1 cm. Dirty water stays on those two cards. It does not move onto the 550 W card. The 1.1 cm residual depth stays on the 550 W card. It does not move onto the cards that say dirty water. Clean water is named on all three, and the 550 W page is the one that says clean water only. The two larger cards name clean and dirty together. That pairing stays on QSB-2JH-1300B69 and on WSD55-18-2,2B(A).
The 1300 W pump passes particles up to 3.5 cm. The 2200 W pump passes particles up to 2 cm. More watts is not a larger particle. 3.5 cm stays with 1300 W. 2 cm stays with 2200 W. The larger watt figure, 2200 W, is the smaller particle on these cards. The 550 W card still has no particle diameter. The particle row is not a step that grows with the watt row. 2 cm is smaller than 3.5 cm, and the page leaves it that way.
The outlet on the first two is G2.54–1.27 cm, and a cuttable adapter. The 2200 W outlet is 7.6 cm. The word adapter is not there. G2.54–1.27 cm and the cuttable adapter stay on the 550 W card and the 1300 W card. 7.6 cm stays on the 2200 W card. The adapter is not added to WSD55-18-2,2B(A). 7.6 cm is not written as the outlet on the first two. The outlet does not grow in step with the watts either: the 2200 W card has its own outlet figure, and the two lower watt cards share a different outlet writing, including the adapter those two cards name.
Zero-flow, the float and the housing
The value of the maximum flow-rate row is the word Zero-flow, and that row is only on the 1300 W pump and the 2200 W pump. The flow-volume row is separate, with gallons and litres. Zero-flow does not replace 333.3 l/min or 1000 l/min. On the 1300 W card the flow-volume figures stay 88 gallons a minute and 333.3 l/min. On the 2200 W card they stay 264 gallons a minute and 1000 l/min. Zero-flow is the word in the maximum flow-rate row. It is not a number substituted for those volume figures. The 550 W pump does not have that row. Zero-flow is not written onto QSB-2JH-55051-F. The 550 W table still has its own volume figures, 41.7 gallons a minute and 158 l/min, and it does not have a Zero-flow row beside them.
A float switch is on all of them. Adjustment of the tether length is only in the text of the first two. The 2200 W text names the float and does not say tether adjustment. The float stays on every card. The tether-length sentence stays on the 550 W text and the 1300 W text. It is not added to the 2200 W text. Naming the float on WSD55-18-2,2B(A) is not the same sentence as adjusting the tether length. The power cord is a different row from that tether. The cord lengths are 10 m, 10 m and 8 m. Those metres are the electrical cord in the title and in the cord row. They are not the tether-adjustment sentence.
The housing on the first two is stainless steel. The 2200 W text says a cast-iron base with a rust-resistant surface, and stainless steel. Stainless steel alone is the housing writing on the 550 W card and the 1300 W card. The cast-iron base with a rust-resistant surface stays in the 2200 W text, together with stainless steel on that same card. The cast-iron base is not written onto the first two. IPX8 is on all of them. Thermal overload protection is on all of them. There are no decibels. IPX8 does not change the housing line. Thermal overload protection does not change the housing line. The absence of decibels stays an absence on all three cards. The packs are 36.0 × 19.5 × 24.0 cm, 47.0 × 21.5 × 22.0 cm and 25.0 × 36.0 × 57.0 cm. The pack is not the lift, not the cord and not the outlet. 36.0 × 19.5 × 24.0 cm stays with 550 W. 47.0 × 21.5 × 22.0 cm stays with 1300 W. 25.0 × 36.0 × 57.0 cm stays with 2200 W.
How to choose?
If the pump is 550 W, the lift is 7.5 m, the cord is 10 m, the water is clean water only, and the drain is 1.1 cm, it is QSB-2JH-55051-F. The weight is 5.5 kg. There is no particle size. The horsepower is 0.75 hp. The amps are 1.5 A. The voltage is 230 V 50 Hz. The temperature is 0–35 °C. The text says up to 9500 litres an hour. The table says 41.7 gallons a minute and 158 l/min. The page does not convert those writings. The outlet is G2.54–1.27 cm, with a cuttable adapter. There is no motor-power row and no Zero-flow row. The housing is stainless steel. A float switch is there, and the text includes tether-length adjustment. IPX8 and thermal overload protection are there. The title’s 10 m is the cord. The lift is 7.5 m.
If the pump is 1300 W, the lift is 11 m, the particles are 3.5 cm, and the outlet is G2.54–1.27 cm, it is QSB-2JH-1300B69. The weight is 8.6 kg. The flow-rate row has the word Zero-flow. The horsepower is 1.75 hp. The amps are 4.9 A. The voltage is 230 V 50 Hz. The temperature is 0–35 °C. The cord is 10 m, which is what the title’s 10 m refers to. The lift is 11 m, not that title metre. The text says up to 20 000 litres an hour. The table says 88 gallons a minute and 333.3 l/min. The page does not convert those writings. The water line is clean and dirty water. There is no 1.1 cm on this card. The power row and the motor-power row both write 1300 W. The outlet includes a cuttable adapter. The housing is stainless steel. A float switch is there, with tether-length adjustment in the text. IPX8 and thermal overload protection are there. The pack is 47.0 × 21.5 × 22.0 cm.
If the pump is 2200 W, the lift is 18 m, the cord is 8 m, the particles are 2 cm, and the outlet is 7.6 cm, it is WSD55-18-2,2B(A). The voltage is 220–240 V 50/60 Hz. The weight is 24.4 kg. The horsepower is 3 hp. The amps are 10 A. The temperature is 0–40 °C. The title’s 8 m is the cord. The lift is 18 m. The text says up to 60 000 litres an hour. The table says 264 gallons a minute and 1000 l/min. The page does not convert those writings. The water line is clean and dirty water. The particle, 2 cm, is smaller than the 3.5 cm particle on the 1300 W card. The outlet has no adapter word. The power row and the motor-power row both write 2200 W. The maximum flow-rate row says Zero-flow, and that word does not replace 1000 l/min. The housing text says a cast-iron base with a rust-resistant surface, and stainless steel. A float switch is named, and the text does not say tether-length adjustment. IPX8 and thermal overload protection are there. There are no decibels. The pack is 25.0 × 36.0 × 57.0 cm.
The title’s 10 m and 8 m are cords. The lifts are 7.5 m, 11 m and 18 m. 1100 W is not on the page. The cards are 550 W, 1300 W and 2200 W, with 0.75 hp, 1.75 hp and 3 hp. Dirty water, the 1.1 cm residual depth, the particle size, the outlet, Zero-flow, the voltage, the temperature, the float’s tether sentence and the housing stay on the cards that state them.
Comparison
| Product | Price | What sets it apart |
|---|---|---|
| 550 W, lift 7.5 m, cord 10 m, clean water | 98,90 € | 158 l/min, 1.5 A, 5.5 kg, drain 1.1 cm |
| 1300 W, lift 11 m, particle 3.5 cm | 155,90 € | 333.3 l/min, 4.9 A, 8.6 kg, Zero-flow |
| 2200 W, lift 18 m, cord 8 m, particle 2 cm | 305,90 € | 1000 l/min, 10 A, 24.4 kg, cast iron and steel |
The price in the link is the shop’s current price and opens the product.
Who is this not for?
- 1100 W is not there. The powers are 550 W, 1300 W and 2200 W.
- The metres in the title are cords. The lift is 7.5 m, 11 m and 18 m.
- Litres an hour and litres a minute both stay. The page does not convert them.
- The 2200 W particle is 2 cm. The 1300 W particle is 3.5 cm. More watts is not a larger particle.
Frequently asked questions
Is the choice 1100 W or 2200 W?
No. The pages are 550 W and 0.75 hp, 1300 W and 1.75 hp, and 2200 W and 3 hp. 1100 W is not there. The old title’s 1100 W is not a card on these pages. The choice the cards give is 550 W, 1300 W and 2200 W. 2200 W is one of those three cards, WSD55-18-2,2B(A), with 3 hp, 10 A and a lift of 18 m. It is not the other half of a 1100 W pair, because 1100 W is not on a page here.
Is the 10 m in the title the lift height?
The 550 W title and the 1300 W title write 10 m. The cord is 10 m. The lift is 7.5 m and 11 m. The 2200 W title writes 8 m, the cord is 8 m, and the lift is 18 m. The 10 m in a title is the cord row on that page. It is not the lift. 7.5 m stays the lift on QSB-2JH-55051-F. 11 m stays the lift on QSB-2JH-1300B69. 18 m stays the lift on WSD55-18-2,2B(A), whose title metre is 8 m, matching its cord.
Which one lifts higher?
The 2200 W pump, 18 m. Then the 1300 W pump, 11 m. Then the 550 W pump, 7.5 m. The highest has the shortest cord, 8 m. The two lower lifts have a 10 m cord. Lift and cord stay on separate rows. The order of the lift is 18 m, then 11 m, then 7.5 m. The order of the cord is not the same order: 8 m is on the highest lift, and 10 m is on the other two.
What is the difference between 9500 litres an hour and 158 l/min?
Both writings are on the 550 W page. The text is the hour line. The table is gallons and minutes. The page does not say that one is a conversion of the other. The 550 W text says up to 9500 litres an hour. The 550 W table says 158 l/min, together with 41.7 gallons a minute. The page does not rewrite those as one figure. The same split is on the other cards. The 1300 W text says up to 20 000 litres an hour. The 1300 W table says 333.3 l/min, together with 88 gallons a minute. The 2200 W text says up to 60 000 litres an hour. The 2200 W table says 1000 l/min, together with 264 gallons a minute.
Do all of them pump dirty water?
No. The 550 W page says clean water. The 1300 W page and the 2200 W page say clean and dirty water. The words dirty water are not on the 550 W page. Dirty water stays on QSB-2JH-1300B69 and WSD55-18-2,2B(A). Clean water only stays the water line on QSB-2JH-55051-F. The watt figure does not move the dirty-water words onto the card that does not say them.
How low does the 550 W drain?
Down to 1.1 cm. That sentence is not on the other two. The residual depth of 1.1 cm stays on the 550 W card. The 1300 W card and the 2200 W card do not have 1.1 cm. Their pages do not state this residual depth. 1.1 cm is not a particle size, and it is not an outlet size. The particle figures and the outlet figures are other rows, on the cards that write them.
How large are the particles?
The 1300 W pump, up to 3.5 cm. The 2200 W pump, up to 2 cm. The 550 W page has no particle size. More watts is not a larger particle. 3.5 cm stays with QSB-2JH-1300B69. 2 cm stays with WSD55-18-2,2B(A). No particle diameter is added to QSB-2JH-55051-F. 2 cm is the figure on the 2200 W card, and it is smaller than 3.5 cm.
What is the outlet?
On the first two, G2.54–1.27 cm and a cuttable adapter. On the 2200 W pump, 7.6 cm, without the word adapter. The adapter stays on the 550 W card and the 1300 W card. It is not added to the 2200 W outlet. 7.6 cm stays the outlet writing on WSD55-18-2,2B(A). G2.54–1.27 cm stays the outlet writing on the other two. The outlet is not the lift and not the cord.
What is Zero-flow?
It is the value of the maximum flow-rate row on the 1300 W pump and the 2200 W pump. The flow-volume numbers are on another row. The 550 W pump does not have this row. Zero-flow does not replace 333.3 l/min or 1000 l/min. The word stays the maximum flow-rate value where the page writes that row. The gallons and the litres a minute stay on the flow-volume row. Zero-flow is not written onto the 550 W card.
What voltage?
The 550 W pump and the 1300 W pump are 230 V 50 Hz. The 2200 W pump is 220–240 V 50/60 Hz. The amps are 1.5 A, 4.9 A and 10 A. The page does not multiply the amps by the voltage. 230 V 50 Hz is not the 2200 W card’s voltage line. 220–240 V 50/60 Hz is not the voltage line on the first two. The amp rows stay beside their own cards and are not rewritten as watts.
What temperature?
The 550 W pump and the 1300 W pump are 0–35 °C. The 2200 W pump is 0–40 °C. 0–35 °C stays on the first two cards. 0–40 °C stays on WSD55-18-2,2B(A). The temperature is not one shared range. The higher top, 40 °C, is on the 2200 W card. The first two stop at 35 °C on the page.
Is there a float on all of them?
Yes. Adjustment of the tether length is only in the 550 W text and the 1300 W text. The 2200 W text does not have that sentence. A float switch is named on all three. Naming the float is not the tether-length sentence. That sentence stays on the first two. The 2200 W text names the float and does not say that the tether length is adjusted. The power-cord lengths, 10 m and 8 m, are a different row.
What is the housing?
The 550 W pump and the 1300 W pump are stainless steel. The 2200 W text says a cast-iron base and stainless steel. The cast-iron base is written with a rust-resistant surface. IPX8 is on all of them. Stainless steel alone stays the housing on the first two. The cast-iron base stays in the 2200 W text, with stainless steel also named there. IPX8 does not replace either housing writing. Thermal overload protection is on all three as well, and there are no decibels.
Which is the heaviest?
The 2200 W pump is 24.4 kg. The 1300 W pump is 8.6 kg. The 550 W pump is 5.5 kg. 24.4 kg stays with WSD55-18-2,2B(A). 8.6 kg stays with QSB-2JH-1300B69. 5.5 kg stays with QSB-2JH-55051-F. The weights are the product weights on those cards. They are not the pack sizes. The packs stay 36.0 × 19.5 × 24.0 cm, 47.0 × 21.5 × 22.0 cm and 25.0 × 36.0 × 57.0 cm.
Where does the page put them?
The 550 W page names a flood, a hot tub or a pool, and watering. The two larger pages name a flood, a hot tub or a pool, and a garden pond. The word watering is only in the 550 W text. A garden pond is the place the two larger cards name in that line. Watering is not added to them. A garden pond is not added to the 550 W line. The shared words on that line are a flood, and a hot tub or a pool. Each card then keeps the last place its own text names.