Pirkšanas ceļveži

Which pipe press?

Which pipe press?

Short answer: Three presses, and they do not press the same pipe. The hand tool is aluminium, with a hardness on the page of up to 53 HRC, and four dies: #6 is 7.94 mm, #8 is 1.03 cm, #10 is 1.27 cm, and #12 is 1.59 cm. The gross weight is 7.71 kg. This is a hose crimp, and the page names an air-conditioner hose. There is no electricity on it. The other two are 18 V presses, with a force of up to 32 kN, each with three jaws, not two. One jaw set is M15, M22 and M28, European M-profile stainless pipe. The other is V15, V22 and V28, V-profile. The model number on both pages is ZEP-1550, the weight is 14.4 kg, the size is 455 × 130 × 78 mm, and there are two 4.0 Ah batteries. An M jaw does not press V pipe just because the number is the same.

The hand tool is a hose, not a wall pipe

The hand tool’s page talks about a crimp, a die, and a hose. The four sizes are #6, #8, #10 and #12. The page itself gives the measurements: 7.94 mm, 1.03 cm, 1.27 cm and 1.59 cm. Those units stay as the page writes them. #8 is not rewritten as a millimetre, and none of the four is M15 or V15. Tightening is by a screw, with a wrench. The base goes on a bench or between the jaws of a vise. The box is a plastic toolbox. The gross weight is 7.71 kg.

The page names project-car air-conditioner lines, a beadlock fitting, and an air-conditioner hose. This page does not name stainless M-profile or V-profile pipe. 32 kN and 18 V do not belong here. The hand crimper is not the 18 V press, and it is not an M-profile jaw or a V-profile jaw. The page gives the package size twice, 33 × 28 × 21 cm and 11 × 28 × 34 cm. Which of those is the outer pack, the page does not spell out. There is no battery on this card, and there is no force in kN. What the page gives instead of a kilonewton figure is a hardness of up to 53 HRC.

Three jaws, not two

The electric page says three jaws. An old title of two jaws does not match that row. The M machine has M15, M22 and M28. The V machine has V15, V22 and V28. Both say European-standard stainless pipe, but the profile is a different letter. If the pipe in the house is M, a V jaw is the other profile. If the pipe is V, an M jaw is the other profile. The page does not say that one jaw fits both. An M jaw does not press V pipe because the model number is the same.

The force on both is up to 32 kN. The page says that for other pipe another clamp is bought separately, and that these are compatible with 32 kN standard clamps. Those extra clamps are not in the box beyond the three that are named. 350 presses on one charge is the page’s sentence on both. That is the page’s number, not presses counted here. The hand tool’s four dies are not placed on these jaws, and the electric 32 kN is not placed on the hand tool’s #12 die.

The same model number is not the same jaw

Both electric tools have the model ZEP-1550. The weight is 14.4 kg, the size is 455 × 130 × 78 mm, the head turns 180°, there are two batteries of 18 V 4.0 Ah and a fast charger, and there is a carry bag. Those rows are similarly copied. The difference the page actually changes is the jaw’s letter: M or V. ZEP-1550 on both pages does not make one product with one jaw. The weight and the size are on both. The jaws are not.

18 V is not a mains cord. The page does not give 230 V work without a battery. The charger is in the kit, and charging hours are not given. A head at 180° and a thin body are the page’s account of a tight place. The hand tool’s screw and four dies are not put here. The hand page does not describe a corner by a rotating head. That head, and the thin body, stay on the electric pages. The electric package is 16 × 42 × 52 cm. That one size is not either of the two sizes written on the hand page.

How to choose

If the job is an air-conditioner hose crimp and the size is #6, #8, #10 or #12, that is the hand tool. #6 is 7.94 mm, #8 is 1.03 cm, #10 is 1.27 cm, and #12 is 1.59 cm. There is no electricity and no 32 kN. The page gives aluminium, a hardness of up to 53 HRC, a gross weight of 7.71 kg, a screw tightened with a wrench, and a base for a bench or a vise. The box is plastic. The page names a beadlock fitting and project-car air-conditioner lines. It does not name an M-profile or a V-profile wall pipe.

If the pipe is European M-profile and the size is M15, M22 or M28, that is the 18 V press with those three jaws. The force is up to 32 kN. The model on the page is ZEP-1550. The weight is 14.4 kg, the size is 455 × 130 × 78 mm, the head turns 180°, and the kit has two 18 V 4.0 Ah batteries, a fast charger, and a carry bag. The page’s sentence is 350 presses on one charge. A clamp for other pipe is bought separately.

If the pipe is V-profile, V15, V22 or V28, that is the other 18 V press. The model number ZEP-1550 is on both pages. The jaw is not. The force, the two 4.0 Ah batteries, the 14.4 kg, the 455 × 130 × 78 mm size, the 180° head, and the carry bag are written on this card as well. The letter on the jaw is V. An M jaw is the other profile.

If the jaw’s letter is not known, the page does not read it off the pipe in the house. The wrong letter is the other profile, not the same press under another name. The hand dies #6 to #12 do not fill that gap. They are hose-crimp sizes, not M15 and not V15.

Comparison

Product Price What sets it apart
Hand hose press, dies #6–#12 145,90 € by hand, up to 53 HRC, 7.71 kg gross, air-conditioner hose
18 V pipe press, jaws M15 M22 M28 1 124,90 € 32 kN, two 4.0 Ah batteries, 14.4 kg, M-profile
18 V pipe press, jaws V15 V22 V28 1 126,90 € 32 kN, the same batteries, 14.4 kg, V-profile

The price in the link is the shop’s current price and opens the product.

Who this is not for

  • The hand tool does not press M-profile or V-profile wall pipe. The page talks about a hose crimp. It is not the 18 V press.
  • An M jaw and a V jaw are not the same profile, even though the model number is ZEP-1550 on both. An M jaw does not press V pipe.
  • There are three jaws, not two. An old title of two jaws does not match the page.
  • 350 presses per charge is the page’s sentence, not work counted here. The page also says up to 350 times. Extra 32 kN clamps are bought separately.

Frequently asked questions

Is the hand press the same as the 18 V press?

No. The hand tool is a hose crimp with four dies, #6 to #12, and no battery. The 18 V presses are 32 kN and have three jaws for stainless pipe. The hand crimper is not an M-profile jaw and not a V-profile jaw.

How many jaws does the electric one have?

Three. On the M machine, M15, M22 and M28. On the V machine, V15, V22 and V28. Talk of two jaws does not match the page. An old title of two jaws does not agree with that row.

Does an M jaw press V pipe?

The page does not say that. M is M-profile and V is V-profile. The same model number ZEP-1550 does not make the jaw the same. On the page, another clamp is bought separately.

What is the force?

On the electric presses, up to 32 kN. The hand tool has no force in kN. It has a hardness of up to 53 HRC. 32 kN is not placed on die #12.

What battery is in the box?

Each electric press: two 18 V 4.0 Ah batteries and a fast charger. The hand tool has no battery. The page does not say charging hours. 18 V is not a mains cord, and the page does not give 230 V work without a battery.

How many presses on one charge?

The page says up to 350 times on both electric presses. 350 presses on one charge is the page’s sentence. It is the page’s number, not presses counted here.

What size are the hand dies?

#6 is 7.94 mm, #8 is 1.03 cm, #10 is 1.27 cm, and #12 is 1.59 cm. These are not M15 and not V15. The page leaves #8, #10 and #12 in centimetres.

Where does the hand tool mount?

The page names a base that goes on a bench or between the jaws of a vise. It does not have a head that turns 180°. That head is on the electric presses.

Is model ZEP-1550 one product?

The number is the same on both electric pages. The jaws are different. The weight of 14.4 kg and the size of 455 × 130 × 78 mm are on both. The same number does not make the M jaw and the V jaw one jaw.

What hose does the hand tool press?

The page names an air-conditioner hose, a beadlock fitting, and project-car air-conditioner lines. A drinking-water M-pipe is not inferred from that. Stainless M-profile and V-profile pipe are not named on this page.

Are there more 32 kN clamps in the box?

The page states compatibility with 32 kN standard clamps, and that a clamp for other pipe is bought separately. Named in the box are three jaws, M or V. The extra clamps are not in the box.

How heavy is it to carry?

The hand tool is 7.71 kg gross, in a plastic box. The electric press is 14.4 kg net, plus two batteries, in a carry bag. Those weights are not the same package.

Does the head fit a tight corner?

The electric page names a head that turns 180° and a thin body. The hand tool’s page does not describe a corner that way. It has no rotating head.

Does the package have two sizes?

The hand page writes 33 × 28 × 21 cm and 11 × 28 × 34 cm. Which is the box, the page does not explain, and it does not say which is the outer pack. The electric package is 16 × 42 × 52 cm.

Autors: mano.ee komanda. Cena ceļvedī ir veikala pašreizējā cena un ved uz preci. Piegāde parasti 4–10 dienas.