Short answer: Three pages, one mower. The tyres, model ZH001, are two pieces, PU and steel, net 5 kg. The table says 278 × 100–177 mm, a hub depth of 86.36 mm, a bushing inner diameter of 19.05 mm, a wheel row of 11 × 4-5, and a load capacity of 158.76 kg per unit. The text says a tyre diameter of 27.9 cm, a width of 10.2 cm and a rim diameter of 17.8 cm, and up to 159 kg per wheel. The title says 12.7 cm. Those measurements stay on the page as they are written. The roller mower, model HS-GT1601D, weighs 6.8 kg, has five blades, a table cutting width of 400 mm and a height of 15–45 mm. The text says a width of 40.6 cm and a height of 1.52–4.45 cm. There is no current, no battery and no fuel. The lift, model SX2806, does not mow. The text says 227 kg, and the table says 225 kg. The lift height in the text is up to 0.66 m, and in the table it is 0–658 mm.
Products in this guide
Lawn mower tyres, 2 pcs, with rims78,90 €View →
Push roller mower, 400 mm, without a motor133,90 €View →
Lawn mower lift, hydraulic232,90 €View →
35 cm and 45 cm are not these products
A cutting width of 35 cm is not on any of these pages. A cutting width of 45 cm is not on them either. 45 mm is the upper limit of the roller mower’s height in the table, and the title writes that 45 mm beside a cutting width of 40 cm. Height and width are different rows. The table’s 40 cm is written as 400 mm. The text says 40.6 cm. The page does not explain the 6 mm difference. 400 mm and 40.6 cm both stay. They are two figures for the width, not two mowers. 45 mm is not rewritten as 45 cm. The title’s pairing of 40 cm and 45 mm does not turn the height row into a width row.
The 35 cm mower is not in this set. These three pages do not write a 35 cm cutting width. They do not write a 45 cm cutting width. The only cutting width writings in the set are on the roller: 400 mm in the table, 40.6 cm in the text, and 40 cm in the title beside 45 mm. 45 mm stays the table’s height ceiling, inside the range 15–45 mm. The text’s height range is 1.52–4.45 cm. Those two height writings stay on the roller page. They are not moved onto the tyre and not moved onto the lift.
The tyres do not mow. The lift does not mow. If the search is for three mowers in three widths, that set is not here. What is here is a wheel, a roller and a jack. The wheel is ZH001. The roller is HS-GT1601D. The jack is the hydraulic lift SX2806. Only the roller has blades, a cutting width and a cutting height. The other two pages do not.
A wheel is not a mower
Two tyres with rims, material PU and steel. The text says unbreakable, wear-resistant and puncture-resistant PU. The load capacity in the table is 158.76 kg per unit. The text says up to 159 kg per wheel. Both figures are on the page. They are not pulled into one figure. 158.76 kg stays the table’s per-unit load. Up to 159 kg stays the text’s per-wheel load. The net of 5 kg is the weight of the pair, not the load capacity. 5 kg is not 158.76 kg, and it is not 159 kg. The pair’s own weight stays 5 kg on ZH001.
The measurements are not one number. The text writes a diameter of 27.9 cm, a width of 10.2 cm, a rim of 17.8 cm, a bushing of 8.64 cm and a hub depth of 8.64 cm. The table writes 278 × 100–177 mm, a hub of 86.36 mm, a bushing inner diameter of 19.05 mm, and the specification 11 × 4-5. The page lists both writings. It does not collapse them into a single number. The text’s 8.64 cm bushing stays in the text. The table’s 19.05 mm inner diameter stays in the table. The text’s hub depth of 8.64 cm stays in the text. The table’s hub of 86.36 mm stays in the table. 27.9 cm, 10.2 cm and 17.8 cm stay the text’s three size writings. 278 × 100–177 mm stays the table’s size line.
The title adds 12.7 cm and does not say which of these measurements it is. 12.7 cm is not put in place of the rim’s 17.8 cm. It is not put in place of the tyre diameter 27.9 cm, and it is not put in place of the width 10.2 cm. 12.7 cm stays the title’s figure on the tyre page. It is not a cutting width, and it is not a grass height. The tyre page does not mow, so 12.7 cm is not a mowing figure. It stays where the title puts it, unassigned to the other measurements the page also writes.
The carton is 29 × 22 × 29 cm. The text says 20 extra accessories, sleeves and seals. The page does not name the mower model the tyre fits. It says the measurement has to be compared with your own wheel. ZH001 is a pair of tyres. It is not HS-GT1601D, and it is not SX2806. The load 158.76 kg per unit is the tyre’s load row. It is not the roller’s weight of 6.8 kg, and it is not the lift’s 227 kg or 225 kg. The width 10.2 cm on this page is a tyre width. It is not the roller’s sentence about trimming grass below 10.2 cm. Those two 10.2 cm writings sit on different pages and name different things.
The only mower is a roller, not a tractor
HS-GT1601D is a push roller mower. The title says a push tractor. The page does not give a motor, a horsepower or a gear. The text says there is no battery, no electricity and no fuel. There is no current. Five blades, material UNS1566, tube Q195. The weight is 6.8 kg. The size is 122 × 54 × 22 cm. Assembly in the text is about 10 minutes, without tools. A grass bag is in the kit. The roller is the only page in this set that mows. The title’s word tractor does not add a motor the page does not give. A roller is not a tractor on the evidence the page itself writes: no motor, no horsepower, no gears, no battery, no electricity, no fuel, and a weight of 6.8 kg.
The blade count stays on this page. Five blades, UNS1566, with the tube Q195, and a grass bag in the kit. The tyre page has no blade count. The lift page has no blade count. Five is not written onto ZH001 or SX2806. The grass bag stays with HS-GT1601D. The size 122 × 54 × 22 cm stays with the roller. The assembly sentence, about 10 minutes and without tools, stays with the roller. None of those rows is a tyre row or a lift row.
The height is a range, not one number. The table is 15–45 mm. The text is 1.52–4.45 cm. These are two writings on the same page. The page does not collapse them into one figure. 45 mm is the top of the table’s range. It is not 45 cm, and it is not a cutting width. The text adds that the grass is worth trimming below 10.2 cm first, and that the blade is lowered for the second mowing. That 10.2 cm is the roller’s grass sentence. It is not the tyre’s width of 10.2 cm. If the roller jams, the page says to pull it back so that a stick or a leaf can be taken out. That sentence stays on the roller page.
400 mm and 40.6 cm are two writings of the width, not two mowers. The table writes 400 mm. The text writes 40.6 cm. The title writes 40 cm beside 45 mm. The page does not explain the difference between 400 mm and 40.6 cm. Both figures stay. 400 mm is not replaced by 40.6 cm, and 40.6 cm is not replaced by 400 mm. There is still one roller in this set, HS-GT1601D, at 6.8 kg, with five blades and no motor. A second width figure is not a second machine.
The lift holds a mower and does not mow
SX2806 is a hydraulic lift. The text says a load capacity of 227 kg and a lift of up to 0.66 m. The table says a load capacity of 225 kg and a lift height of 0–658 mm. The two pairs are not harmonised. 227 kg stays the text. 225 kg stays the table. Up to 0.66 m stays the text. 0–658 mm stays the table. The page does not pick one load and delete the other, and it does not pick one height and delete the other. 227 kg is not written over 225 kg. 0.66 m is not written over 0–658 mm. Neither pair is a cutting width. The lift does not mow.
The product size is 1.0 × 1.0 × 0.1 m. The weight is 25.3 kg. The material is carbon structural steel. 25.3 kg is the lift’s own weight. It is not the 227 kg text load, and it is not the 225 kg table load. 25.3 kg is not the roller’s 6.8 kg, and it is not the tyre pair’s net of 5 kg. The life on the page is 150–200 times. That is a sentence on the page, not a cycle counted here. The page writes 150–200 times on the lift. This guide does not count that figure, and it does not report it as a measured result. 150–200 times stays on SX2806 only. It is not a blade life, and it is not a tyre life.
Adjustable tyre-frame arms, four positions at both ends, and the outer edges of the front wheels at 103–122 cm. Three slots for three heights. The handle works from both ends. The wheels are for moving the lift itself. The frames come off, and the support folds. The text names a lawn mower, a soil tiller, a brush cutter and an ATV. It has no cutting width. The carton is 15 × 41 × 102 cm. The 103–122 cm range is the lift’s front-wheel outer edges. It is not the ZH001 tyre diameter of 27.9 cm, not the rim of 17.8 cm, and not the title’s 12.7 cm. The lift’s own wheels are how the lift is moved. They are not the pair of PU tyres.
The machines named on the lift page are what the text says the lift can hold: a lawn mower, a soil tiller, a brush cutter and an ATV. Naming a lawn mower there does not give SX2806 blades or a cutting width. The roller remains the only mower in the set. The lift’s load rows stay 227 kg in the text and 225 kg in the table. The lift’s height rows stay up to 0.66 m in the text and 0–658 mm in the table. The handle from both ends, the four positions, the three slots, the folding support and the removable frames stay on this page. They are not features of HS-GT1601D, and they are not features of ZH001.
How to choose?
If the aim is to mow and there is no current, it is the roller HS-GT1601D. The width in the table is 400 mm. The width in the text is 40.6 cm. The title writes 40 cm beside 45 mm. The height is 15–45 mm in the table and 1.52–4.45 cm in the text. The weight is 6.8 kg. Five blades, UNS1566, tube Q195, grass bag in the kit. The size is 122 × 54 × 22 cm. Assembly is about 10 minutes, without tools. There is no battery, no electricity, no fuel and no motor. The text says to trim the grass below 10.2 cm first and then lower the blade. If the roller jams, pull it back and take out a stick or a leaf. The title says a push tractor. The page does not make it a tractor.
If what is needed is two PU tyres with rims, it is ZH001. The load capacity in the table is 158.76 kg per unit. The text says up to 159 kg per wheel. The net is 5 kg for the pair. Your own wheel’s measurement has to be set beside the page. The text writes 27.9 cm, 10.2 cm, 17.8 cm, a bushing of 8.64 cm and a hub depth of 8.64 cm. The table writes 278 × 100–177 mm, a hub of 86.36 mm, a bushing inner diameter of 19.05 mm, and 11 × 4-5. The title says 12.7 cm and does not say which measurement that is. The carton is 29 × 22 × 29 cm, with 20 extra accessories, sleeves and seals. This page does not mow. It does not name the mower model the tyre fits.
If the mower is to be lifted to the blade, it is SX2806. The table says 225 kg and 0–658 mm. The text says 227 kg and 0.66 m. The lift’s own weight is 25.3 kg. The size is 1.0 × 1.0 × 0.1 m. The material is carbon structural steel. The life sentence on the page is 150–200 times, and it is not a cycle counted here. The front-wheel outer edges are 103–122 cm. Four positions at both ends, three slots, a handle from both ends. The frames come off and the support folds. The text names a lawn mower, a soil tiller, a brush cutter and an ATV. There is no cutting width. The carton is 15 × 41 × 102 cm. This page does not mow.
A 35 cm mower is not here, and a 45 cm cutting width is not here. 45 mm is the ceiling of the roller’s height. 400 mm and 40.6 cm stay as two width figures on the one roller. The tyre’s 12.7 cm stays on the tyre title. The lift’s 227 kg and 225 kg stay on the lift. Only HS-GT1601D mows.
Comparison
| Product | Price | What sets it apart |
|---|---|---|
| Lawn mower tyres, 2 pcs, with rims | 78,90 € | does not mow, 158.76 kg on the page, PU and steel, net 5 kg |
| Push roller mower, 400 mm, without a motor | 133,90 € | the only mower, 5 blades, 6.8 kg, no current |
| Lawn mower lift, hydraulic | 232,90 € | does not mow, table 225 kg, text 227 kg, weight 25.3 kg |
The price in the link is the shop’s current price and opens the product.
Who is this not for?
- Three cutting widths of 35, 40 and 45 cm are not these products. Only the roller mows.
- 45 mm is the ceiling of the cutting height, not a 45 cm width.
- 158.76 kg is the wheel’s load capacity, not the mower’s weight. The mower weighs 6.8 kg.
- 227 kg and 225 kg are two rows on the lift. They are not pulled into one, and the lift does not mow.
Frequently asked questions
Are there three mowers here?
No. One page is tyres, one is a push roller, and one is a hydraulic lift. Only the roller cuts. ZH001 is two PU tyres with rims and does not mow. HS-GT1601D is the push roller, 6.8 kg, five blades, with no motor. SX2806 is the lift and does not mow. A search for three mowers in three widths does not match this set. The set is a wheel, a roller and a jack.
Where is the 35 cm mower?
It is not on these three pages. A 35 cm cutting width is not written. The 35 cm mower is not in this set. The width writings that are here belong to the roller: 400 mm in the table, 40.6 cm in the text, and 40 cm in the title beside 45 mm. None of those is 35 cm. The tyre and the lift have no cutting width at all.
Is 45 mm 45 cm?
No. 45 mm is the upper limit of the roller mower’s cutting height in the table, inside 15–45 mm. The cutting width is 400 mm, and in the text it is 40.6 cm. The title writes 45 mm beside 40 cm. Height and width stay different rows. 45 mm is not a 45 cm width, and it is not turned into 45 cm. The text’s height range, 1.52–4.45 cm, stays its own writing beside 15–45 mm. The page does not collapse those two height writings into one number.
Why is the width both 400 mm and 40.6 cm?
The table says 400 mm. The text says 40.6 cm. The page does not explain the difference. Both stay. 400 mm and 40.6 cm are two figures, not two mowers. The title also writes 40 cm beside 45 mm, and the table’s 40 cm is the 400 mm writing. 40.6 cm is not deleted, and 400 mm is not deleted. HS-GT1601D remains one roller. The 6 mm difference is not given an explanation on the page.
Is the roller a tractor?
The title says a push tractor. The page does not give a motor or fuel. The text says there is no battery, no electricity and no fuel. It is a push roller, 6.8 kg. There is no horsepower and no gear. A roller is not a tractor on what this page writes. The title’s word stays in the title. The missing motor stays missing. Five blades, UNS1566, tube Q195 and a grass bag do not add a tractor drive. There is no current.
How many blades are there?
Five, material UNS1566. The tube is Q195. A grass bag is in the kit. The blade count is on the roller, HS-GT1601D. The tyre page has no blades. The lift page has no blades. Five stays with the roller, together with the weight 6.8 kg, the size 122 × 54 × 22 cm, and the assembly of about 10 minutes without tools. The blades are not a feature of ZH001 or of SX2806.
How tall a grass does the roller take?
The text says to trim below 10.2 cm and then lower the blade. The height range is 15–45 mm in the table and 1.52–4.45 cm in the text. Both ranges stay. The 10.2 cm in that sentence is the roller’s grass line. The tyre page also writes 10.2 cm, and there it is the tyre’s width, not a grass height. If the roller jams, the page says to pull it back and take out a stick or a leaf. The second mowing is the pass where the blade is lowered. The height is a range, not a single cutting height.
Is the tyre a mower?
No. Two PU tyres with rims, model ZH001, net 5 kg. They go in place of a mower wheel or a lawn-tractor wheel when the measurement matches. The page does not name the mower model they fit. It says to compare them with your own wheel. The pair does not mow. PU and steel, the load rows, 12.7 cm in the title, and the carton 29 × 22 × 29 cm stay on this page. A lawn tractor named as a wheel the tyre can replace is not the roller in this set. The roller is HS-GT1601D, and the title’s push-tractor word still comes with no motor.
How much does the tyre carry?
The table says 158.76 kg per unit. The text says up to 159 kg per wheel. Both stay. The net of 5 kg is the weight of the tyres themselves, the pair, not the load. 158.76 kg is not the roller’s 6.8 kg. Up to 159 kg is not the lift’s 227 kg and not the lift’s 225 kg. The load stays on ZH001. The page does not round 158.76 kg into 159 kg, and it does not replace 159 kg with 158.76 kg. Each writing stays on its row.
What is 12.7 cm?
It is in the tyre title. The text says a rim diameter of 17.8 cm and a tyre diameter of 27.9 cm. The page does not say that 12.7 cm is either of those. It is not substituted for them. 12.7 cm stays the title’s figure. The width 10.2 cm, the bushing 8.64 cm and the hub depth 8.64 cm stay in the text as well. The table’s 86.36 mm hub and 19.05 mm bushing inner diameter stay in the table. 12.7 cm is not moved onto the roller and not moved onto the lift. It is not a cutting width and not a grass height.
Does the lift mow?
No. SX2806 lifts. The text names a mower, a tiller, a brush cutter and an ATV. There is no cutting width. There is no blade count. The lift’s own weight is 25.3 kg, the size is 1.0 × 1.0 × 0.1 m, and the material is carbon structural steel. The wheels on this page move the lift. The frames come off and the support folds. The handle works from both ends. Naming a mower in the list of what it holds does not make the lift a mower. The only mower in the set remains the roller.
Does the lift carry 227 kg or 225 kg?
The text says 227 kg. The table says 225 kg. Both are on the page. They are not pulled into one figure. 227 kg stays the text’s load capacity. 225 kg stays the table’s load capacity. Neither is the lift’s own weight, which is 25.3 kg. Neither is the roller’s 6.8 kg, and neither is the tyre’s 158.76 kg per unit or the text’s up to 159 kg per wheel. The two lift loads stay on SX2806, on two rows.
How high does the lift raise?
The text says up to 0.66 m. The table says 0–658 mm. Both stay. The page does not harmonise them. The handle works from both ends. The front-wheel range in the text is 103–122 cm, which is the outer edges of the lift’s front wheels, with four positions at both ends and three slots for three heights. 0.66 m is not rewritten as 0–658 mm, and 0–658 mm is not rewritten as 0.66 m. Those height rows are not a cutting height. The cutting height ranges, 15–45 mm and 1.52–4.45 cm, stay on the roller.
Was the life of 150–200 times measured?
It is a sentence on the lift’s page. It was not counted here. The page writes 150–200 times on SX2806. This guide does not count that figure over, and it does not turn the sentence into a measured result. 150–200 times stays the lift page’s life sentence. It is not on the roller, and it is not on the tyres. It is not a blade count and not a load. 227 kg, 225 kg, 0.66 m and 0–658 mm stay their own rows beside that sentence.