Short answer: Three detectors, and waterproofing is not one mark. The SS281 coil is 20.3 cm in the text and 203.2 mm in the table, the frequency is 5.8 kHz, the detection depth is 203.2 mm, the sensitivity is up to 200 mm, and IP68 is only on the search coil. The weight is 2.7 kg, the power is 9 V direct current, the handle is 77–110 cm, and the screen is FSTN. The page does not put headphones or a shovel in the box. The TS181A coil is 25.4 cm, the frequency is 7.2 kHz, the depth is 25.4 cm, the sensitivity is up to 25 cm, the coil is IP68, the weight is 2.35 kg, and the voltage is 7.2–9.6 V. Wired headphones, six batteries, a bag and a shovel are in the text. There is no dive metre. The TS185A coil is 30.5 cm, the frequency is also 7.2 kHz, the depth is 30.5 cm, the sensitivity is up to 30 cm, and the type is submersible. The table says 3 m. The text says 3.05 m. The weight is 3.2 kg, the voltage is 6.8–9.6 V, and the text has Bluetooth, four rechargeable batteries and a charger. 7.2 kHz does not make the 25.4 cm page and the 30.5 cm page one device.
Products in this guide
Detector 20.3 cm, 5.8 kHz, coil IP6888,90 €View
Detector 25.4 cm, 7.2 kHz, six batteries113,90 €View
Detector 30.5 cm, submersible, 3 m on the page284,90 €View
Coil and depth sit side by side on the page
Each page writes the coil size and the detection depth as almost the same number: 203.2 mm, 25.4 cm, or 30.5 cm. Sensitivity is a separate ceiling: up to 200 mm, up to 25 cm, or up to 30 cm. These are not three holes measured in the ground. They are rows on the page. 20.3 cm in the text and 203.2 mm in the table are two writings on the first page, not two coils. The first page does not gain a second coil from having both a centimetre in the text and a millimetre in the table.
The depth row stays beside the coil row on the card that prints it. SS281 prints 203.2 mm as the detection depth and up to 200 mm as the sensitivity. TS181A prints 25.4 cm as the depth and up to 25 cm as the sensitivity. TS185A prints 30.5 cm as the depth and up to 30 cm as the sensitivity. A depth from one card is not moved onto the next card. A sensitivity ceiling is not rewritten as a deeper hole. 200 mm stays on SS281. 25 cm stays on TS181A. 30 cm stays on TS185A. None of those ceilings is a hole dug for this guide.
Frequency separates the first detector from the other two. 5.8 kHz is only SS281. 7.2 kHz is TS181A and TS185A. The sound is 800–1000 Hz on the first, and 400–1200 Hz on the other two. The noise row is only on the other two: at least 80 dB on the middle one, and at least 75 dB on the submersible. SS281 does not receive 7.2 kHz, does not receive 400–1200 Hz, and does not receive a noise row. The two 7.2 kHz cards do not receive 5.8 kHz, and they do not receive 800–1000 Hz. Sharing 7.2 kHz does not make TS181A and TS185A the same coil, the same depth, or the same noise figure. 80 dB stays on the 25.4 cm page. 75 dB stays on the 30.5 cm page.
25.4 cm is the coil on TS181A. 30.5 cm is the coil on TS185A. 20.3 cm, written also as 203.2 mm, is the coil on SS281. The middle coil is not a rounding that sits between a 20 cm coil and a 30 cm coil. It is the figure that page prints. The larger coil is not a second way of writing the middle coil, even though both of those pages print 7.2 kHz.
IP68 does not mean a dive on every one
The SS281 table says IP68 and, in parentheses, search coil only. The text allows wet grass, shallow water and rain. There is no 3 m on that page. An IP68 coil is not a 3 m dive of the whole machine. A 20 cm coil being waterproof is not the whole device. The IP68 row stays on the search coil. Wet grass, shallow water and rain stay the uses the SS281 text names. They are not a dive rating, and they are not copied forward as 3 m.
The TS181A table says coil IP68 and does not give a dive metre. A 25 cm coil is not also rated to 3 m, because that card does not say so. The weight on that card is 2.35 kg. The coil is 25.4 cm. Coil IP68 stays a coil row. It does not become a submersible type, and it does not become a 3 m row or a 3.05 m sentence. Those dive figures are not pulled onto the 25.4 cm page.
The TS185A table says coil IP68, the type submersible, and a dive of 3 m. The text says up to 3.05 m underwater. 3 m and 3.05 m both stay. They are not averaged, and they are not moved onto SS281 or onto TS181A. Coil IP68 on TS185A is its own row, beside the type and beside the dive figure. The type word submersible stays on TS185A. SS281 does not get that type word. TS181A does not get that type word. This page states the rating. It does not set out a way to dive.
The handle is also three ranges. SS281 is 77–110 cm. The TS181A table is 1056–1326 mm, and the text is 41–52 inches. The TS185A table is 99.1–127 cm, and the text is 39–50 inches. Inches and millimetres stay as the page wrote them. They are not rounded into one centimetre. 41–52 inches stays the TS181A text. 1056–1326 mm stays the TS181A table. 39–50 inches stays the TS185A text. 99.1–127 cm stays the TS185A table. 77–110 cm stays SS281, and it is not rewritten as inches. The page itself does not unify an inch line with a millimetre line, so this guide does not unify them either.
Battery, headphones and seven modes
SS281 power is 9 V direct current. A battery count is not there, and a charger is not there. TS181A voltage is 7.2–9.6 V, and the text has six batteries and wired headphones. Those six batteries are not described as rechargeable, and that page does not name a charger. TS185A voltage is 6.8–9.6 V, and the text has four rechargeable batteries, a charger and a Bluetooth headset. Wired headphones are not copied onto the Bluetooth headset. Bluetooth is not copied onto the wired headphones. 9 V direct current is not rewritten as 7.2–9.6 V or as 6.8–9.6 V. The three power rows stay on the three cards.
Seven modes are in the text of the two larger detectors, and the lists are not the same words. TS181A names all metals, precise search, jewellery, coins, trash, jewellery again, and a custom mode. The word jewellery is on that page twice. TS185A names all metals, precise find, jewellery, coins, trash, ornaments, and a custom mode. Precise find is not the same wording as precise search. An ornament is not the same word as a second jewellery. SS281 does not list modes. The seven names on TS181A stay on TS181A. The seven names on TS185A stay on TS185A. A second jewellery is not added to TS185A, and ornaments are not added to TS181A. No mode list is added to SS281.
A shovel, a bag, and a coil cover or a pinpoint locator are in the text of the two larger ones. SS281 does not name them. The screen is FSTN on the first, and the text there speaks of readability in the sun. The screen is LCD on TS181A and on TS185A. FSTN is not copied onto the LCD pages. LCD is not copied onto SS281. The sun-readability sentence stays with the FSTN page. Temperature from −10 to 50 °C is only in the tables of the two larger detectors. SS281 does not give that row. The temperature row is not invented for the 5.8 kHz page, and it is not treated as a different range on one of the 7.2 kHz pages. Both of those tables print −10 to 50 °C. The headphone row, the battery count, the mode list, the screen word and the temperature row each stay on the cards that state them.
How to choose?
If the coil is 20.3 cm, the frequency is 5.8 kHz, and IP68 is only on the coil, it is SS281. The weight is 2.7 kg, the power is 9 V, and the screen is FSTN. The handle on that card is 77–110 cm. There is no 3 m dive. The page does not name headphones, a shovel, a mode list, or a temperature row. Detection depth on that card is the 203.2 mm row, and sensitivity is up to 200 mm. The sound row is 800–1000 Hz.
If the coil is 25.4 cm and the text has wired headphones and six batteries, it is TS181A. The weight is 2.35 kg, the frequency is 7.2 kHz, and the coil is IP68. There is no dive metre. The voltage is 7.2–9.6 V. The handle table is 1056–1326 mm, and the text is 41–52 inches. Sensitivity is up to 25 cm. The noise row is at least 80 dB. The mode list is the one that says jewellery twice. The screen word is LCD. The temperature row is −10 to 50 °C.
If the page has to say a submersible type and 3 m or 3.05 m, it is TS185A. The coil is 30.5 cm, the weight is 3.2 kg, and the text has Bluetooth and four rechargeable batteries, plus a charger. The voltage is 6.8–9.6 V, not 7.2–9.6 V. The handle table is 99.1–127 cm, and the text is 39–50 inches. Sensitivity is up to 30 cm. The noise row is at least 75 dB. The sixth mode name is ornaments. The screen word is LCD. Coil IP68 is still its own row beside the type and the dive figures.
25.4 cm is not a rounding between 20 cm and 30 cm. It is its own page, its own weight and its own batteries. Two cards that both say 7.2 kHz stay as written: different coil, different voltage, different headphones, different weight, and a dive figure on only one of them.
Comparison
| Product | Price | What sets it apart |
|---|---|---|
| Detector 20.3 cm, 5.8 kHz, coil IP68 | 88,90 € | 2.7 kg, 9 V, FSTN, handle 77–110 cm, no headphones |
| Detector 25.4 cm, 7.2 kHz, six batteries | 113,90 € | 2.35 kg, 7.2–9.6 V, wired headphones, noise ≥80 dB |
| Detector 30.5 cm, submersible, 3 m on the page | 284,90 € | 3.2 kg, 6.8–9.6 V, Bluetooth, four batteries, noise ≥75 dB |
The price in the link is the shop’s current price and opens the product.
Who is this not for?
- IP68 on the coil is not a 3 m dive. 3 m and 3.05 m are only on the 30.5 cm page.
- 7.2 kHz does not make 25.4 cm and 30.5 cm one detector. Voltage, headphones and weight are different.
- Jewellery is named twice on one page. The other page has ornaments. SS281 does not list modes.
- A detection depth of 203.2 mm is not a hole measured in the ground. It is a page row next to the coil.
Frequently asked questions
Is a 20 cm coil waterproof as the whole device?
No. SS281 says IP68 on the search coil only. The text allows wet grass, shallow water and rain. There is no 3 m. The coil size on that card is 20.3 cm in the text and 203.2 mm in the table. Waterproof on the coil is not a rating of the whole machine. The handle, the 9 V power row and the FSTN screen are not given an IP68 line. Wet grass, shallow water and rain stay the sentence the text gives. They are not rewritten as a dive of the whole detector.
Is the 30 cm one submersible?
The TS185A type is submersible. The table says 3 m. The text says up to 3.05 m. Coil IP68 is a separate row. The coil on that card is 30.5 cm, the weight is 3.2 kg, and the voltage is 6.8–9.6 V. Both the 3 m table figure and the 3.05 m text figure stay. The page states those ratings. It does not describe a diving procedure. The submersible type is not added to SS281 or to TS181A.
Is the 25 cm one also 3 m?
No. TS181A says coil IP68 and does not give a dive metre. The weight is 2.35 kg, not 3.2 kg. The coil is 25.4 cm, the voltage is 7.2–9.6 V, and the headphones in the text are wired. 3 m and 3.05 m stay on the 30.5 cm page. A coil marked IP68 on the 25.4 cm card is not the submersible type, and it is not a 3 m rating.
Why are two of them 7.2 kHz?
TS181A and TS185A both say 7.2 kHz. The coil, the voltage, the headphones and the dive are not the same. SS281 is 5.8 kHz. The 25.4 cm card has 7.2–9.6 V, wired headphones, six batteries, at least 80 dB, and no dive metre. The 30.5 cm card has 6.8–9.6 V, a Bluetooth headset, four rechargeable batteries, a charger, at least 75 dB, and the submersible type with 3 m in the table and up to 3.05 m in the text. The shared frequency stays as written on each card. It does not merge the cards.
How deep does the page detect?
The page rows are 203.2 mm, 25.4 cm and 30.5 cm, with sensitivity up to 200 mm, up to 25 cm and up to 30 cm. These are table rows, not holes dug here. 203.2 mm and up to 200 mm stay on SS281, next to the 20.3 cm text and the 203.2 mm coil writing. 25.4 cm and up to 25 cm stay on TS181A. 30.5 cm and up to 30 cm stay on TS185A. Depth and sensitivity stay separate rows. A depth is not moved from one card to another.
What voltage?
9 V direct current is SS281. 7.2–9.6 V is TS181A. 6.8–9.6 V is TS185A. They are not put onto one battery. SS281 states power as 9 V direct current and does not state a battery count. TS181A states voltage and, in the text, six batteries. TS185A states voltage and, in the text, four rechargeable batteries and a charger. The 9 V row is not a 7.2–9.6 V row. The 7.2–9.6 V row is not a 6.8–9.6 V row.
How many batteries?
Six is in the TS181A text. Four rechargeable batteries and a charger are in the TS185A text. SS281 does not say a count. It does say 9 V. The six are not described as rechargeable, and TS181A does not name a charger. The four are described as rechargeable, and the charger stays with them on TS185A. A count is not invented for SS281. Six is not copied onto TS185A. Four is not copied onto TS181A.
Do all of them have headphones?
No. SS281 does not name them, and that page does not put headphones in the box. TS181A has wired headphones. TS185A has a Bluetooth headset. Wired headphones stay on the 25.4 cm page. Bluetooth stays on the 30.5 cm page. Neither headphone row is copied onto SS281, and the two headphone rows are not swapped.
What modes?
SS281 does not list them. TS181A lists seven and says jewellery twice: all metals, precise search, jewellery, coins, trash, jewellery again, and a custom mode. TS185A lists seven, and the sixth is ornaments, not a second jewellery: all metals, precise find, jewellery, coins, trash, ornaments, and a custom mode. Precise search and precise find stay different wordings. The lists stay on the cards that state them.
What screen?
FSTN is SS281, and the text there speaks of readability in the sun. LCD is TS181A and TS185A. FSTN stays on the 5.8 kHz page. LCD stays on the two 7.2 kHz pages. The sun-readability sentence is not copied onto the LCD pages. An LCD word is not copied onto SS281.
How long is the handle?
77–110 cm is SS281. 1056–1326 mm, and in the text 41–52 inches, is TS181A. 99.1–127 cm, and in the text 39–50 inches, is TS185A. The page does not itself unify inches and millimetres. The centimetre range stays on SS281. The millimetre range and the inch range stay together on TS181A, as table and text. The other centimetre range and the other inch range stay together on TS185A. They are not rounded into one shared centimetre.
Is a shovel in the box?
The TS181A text and the TS185A text say a shovel and a bag. SS281 does not name them, and that page does not put a shovel in the box. A shovel and a bag stay in the text of the two larger detectors. They are not added to SS281. The coil cover or pinpoint locator named in those two larger texts stays there as well, and is not added to SS281.
What temperature?
−10 to 50 °C is in the TS181A table and in the TS185A table. SS281 does not give that row. The same temperature row on the two larger cards is not a reason to print it on the 5.8 kHz card. No other temperature is added. The row stays −10 to 50 °C on the cards that print it.
Which one is lighter?
2.35 kg is the 25.4 cm detector. 2.7 kg is the 20.3 cm detector. 3.2 kg is the 30.5 cm detector. A larger coil is not automatically heavier between the first two: the middle one is lighter than the smaller one. 2.35 kg stays on TS181A. 2.7 kg stays on SS281. 3.2 kg stays on TS185A. Weight is not swapped with detection depth, and it is not swapped with the load of a coil rating.