Pirkšanas ceļveži

Which meat grinder?

Which meat grinder?

Short answer: Three meat mincers, and the old question “hand or 1100 W” leaves the middle one out. The hand mincer, model #5, weighs 1.9 kg, measures 285 × 85 × 225 mm, and fastens with a table clamp whose opening is 10–45 mm. The body is 304 stainless. The plate holes are 4.5 mm and 8 mm. There are no watts, because the crank does not need current. The 350 W mincer, model 1A-EG808, weighs 18.2 kg, has a mouth of 8#, and measures 530 × 250 × 440 mm. The page says 2.72 kg per minute and, on a separate line, 2.72 kg. Both stay. The blades are SUS420. The 1100 W mincer, model JQ-7F, calibre 22#, weighs 57.5 kg, measures 565 × 550 × 880 mm, runs at 180 revolutions per minute, and grinds 6.35 kg per minute. The blade size in the table is 5 mm, and the text talks about a slice, a strip and a cube. Volts, amps and hertz are not on any of the three pages.

The hand mincer is not a small 350 W

1.9 kg and a clamp do not replace a motor. This is a meat mincer turned by hand, model #5. The hand page names beef, pork, chicken, fish, small bones, vegetables and chilli, and it names sausage accessories without giving a diameter. Parts on that page go in the dishwasher. The text recommends food oil on the blade. The opening of 10–45 mm is the clamp opening, not the diameter of a mince hole. The holes are 4.5 mm and 8 mm. The body size on that page is 285 × 85 × 225 mm. There is no watt figure, because the crank does not need current.

The 350 W page and the 1100 W page do not name a dishwasher. Those two are washed with water and dried. The food-oil sentence is not copied onto them. The hand page does not grind by the kilogram per minute. It does not have that number. Putting 1.9 kg next to 350 W does not turn the crank machine into model 1A-EG808, and it does not give the hand mincer a mouth of 8# or a size of 530 × 250 × 440 mm. Those lines stay on the 350 W page.

The foods named on the hand page stay on the hand page. Beef, pork, chicken, fish, small bones, vegetables, chilli and sausage accessories without a diameter are that list. The electric pages are not given that list by copying. What those two pages do name, later, is frozen meat and chicken cartilage. The clamp range 10–45 mm is not a third plate. A buyer who reads 10–45 mm as the mince hole has left the hole sizes the hand page actually prints, which are 4.5 mm and 8 mm.

2.72 kg and 6.35 kg are per minute, not a bowl

In the 350 W table the grinding rate is 2.72 kg per minute, and the next line is “meat grinding power 2.72 kg” without a minute. The title says 2.72 kg as well. The page does not say that 2.72 kg is the bowl capacity. Both figures stay, the one with the minute and the one without. They are not folded into a bowl the page never measures. 6.35 kg per minute is the 1100 W line. That is a faster line on the page, not a bigger bowl. No page in this guide gives a bowl volume.

The 1100 W text adds a recommendation: 30 minutes of work and 10 minutes of rest. The 350 W text says the machine can work continuously, and in the same place it asks that a long idle not be left running and that the machine be switched off when it is not in use. Those two sentences about running time are not combined into one rule. 180 revolutions per minute are only on the 1100 W page. The 350 W page does not receive that speed by having fewer watts, and the hand page does not receive it by having no watts.

A higher watt figure is not, by itself, more meat per minute. The pages print two rates where they print them: 2.72 kg/min beside 350 W, and 6.35 kg/min beside 1100 W. The hand page prints neither rate. Nothing on these pages says that a watt number which is not paired with a kilogram-per-minute line still produces more mince. The separate 2.72 kg line, the one without “per minute”, stays a separate line. It is not rewritten as 2.72 kg per minute a second time, and it is not rewritten as the size of a bowl. The title’s 2.72 kg stays the title’s figure. The 6.35 kg/min line stays on JQ-7F.

Plate, slice and sausage tube

The hand mincer has two plates: 4.5 mm and 8 mm. The 350 W kit has one 4.5 mm plate, two cross blades (one already in the machine), a sausage-stuffing plate, three tubes with outside diameters of 1.19 cm, 1.6 cm and 2.21 cm, a mincing stick, a brush and a head lock. An 8 mm plate is not on its page. The 1100 W table gives a blade size of 5 mm. The text says the meat is sliced at a thickness of 5 mm, then cut into strips and into cubes. That 5 mm is not the same row as the hand mincer’s 4.5 mm hole. The 5 mm figure is not read as a hole diameter, because the 1100 W text ties it to slice thickness and then to a strip and a cube.

The calibre is #5 on the hand mincer, 8# on the middle machine and 22# on the heavy machine. Those discs are not swapped with one another. A plate from #5 is not a plate for 8#, and a plate for 8# is not a plate for 22#. The fragment “7.62 cm” in the 1100 W features title does not appear again in the table. It is not taken as a body dimension. The body is 565 × 550 × 880 mm. The hand body stays 285 × 85 × 225 mm, and the 350 W body stays 530 × 250 × 440 mm. None of those three sizes is replaced by 7.62 cm.

Sausage hardware is not one shared tube. Outside diameters are only on the 350 W page: 1.19 cm, 1.6 cm and 2.21 cm, with the sausage-stuffing plate in that same kit. The hand page names sausage accessories and does not give a measure. The 1100 W page names sausage filling and does not give a tube measure. The three diameters are not copied onto the hand mincer, and they are not copied onto JQ-7F. The stuffing plate named in the 350 W kit is not the 4.5 mm plate and not the 8 mm plate the hand page has. The 350 W page still has one 4.5 mm plate. It does not add the hand page’s 8 mm plate.

Weight and material

1.9 kg is the hand mincer. Its box is 12.7 × 30.5 × 32.4 cm, and the body is 304 stainless. 18.2 kg is the 350 W mincer. Its box is 38 × 45.9 × 47.2 cm. The materials named there are stainless steel, carbon steel and plastic, and the motor text says pure copper. The blades on that page are SUS420. 57.5 kg is the 1100 W mincer. Its box is 98 × 55 × 70 cm, and the text says a thick stainless body. The box sizes are the cartons. They are not the machine sizes. The machine sizes remain 285 × 85 × 225 mm, 530 × 250 × 440 mm and 565 × 550 × 880 mm.

Frozen meat and chicken cartilage are in the 350 W text and in the 1100 W text. The hand page says small bones and does not name frozen meat. That split stays. Small bones are not moved onto the electric pages as a substitute for the frozen-meat sentence, and frozen meat is not moved onto the hand page because the other two name it. Chicken cartilage stays with the two pages that name it.

Wattage is not voltage. 350 W and 1100 W are in watts. Volts are not there. The 1100 W mincer is not automatically a 230 V machine only because the watt figure is higher. Amps are not there. Hertz are not there. None of that is filled in. Pure copper is the motor sentence on the 350 W page. It is not copied onto the hand crank, which has no motor, and it is not copied onto the 1100 W page, whose material sentence is a thick stainless body. SUS420 stays with the 350 W blades. 304 stainless stays with the hand body. Carbon steel and plastic stay in the 350 W material list.

How to choose?

If there is no current and the machine has to weigh 1.9 kg, it is the #5. The plates are 4.5 mm and 8 mm. The clamp is 10–45 mm. The dishwasher is that page’s sentence. The body is 304 stainless, the size is 285 × 85 × 225 mm, and the box is 12.7 × 30.5 × 32.4 cm. There is no watt figure and no kilogram-per-minute figure. Sausage accessories are named without a diameter. Food oil on the blade is that page’s recommendation. The shop card for this one carries the price id of the hand mincer.

If the page has to say 2.72 kg per minute and 350 W, it is 1A-EG808. The weight is 18.2 kg, the mouth is 8#, and the sausage tubes are in three sizes, 1.19 cm, 1.6 cm and 2.21 cm. There is no voltage. The separate line of 2.72 kg without a minute stays beside the per-minute line. The size is 530 × 250 × 440 mm. The box is 38 × 45.9 × 47.2 cm. The kit is one 4.5 mm plate, two cross blades with one already in the machine, a sausage-stuffing plate, the three tubes, a mincing stick, a brush and a head lock. The blades are SUS420. The motor text says pure copper. This guide’s shop cards do not carry a price id for that machine. The page is still the page that has to be read for those figures, and the figures stay on it.

If the page has to say 6.35 kg per minute, 180 revolutions and a 5 mm slice, it is JQ-7F. That is 1100 W and 57.5 kg. The running-time recommendation is 30 minutes of work and 10 minutes of rest. The calibre is 22#. The size is 565 × 550 × 880 mm. The box is 98 × 55 × 70 cm. The text says a thick stainless body, and it talks about a slice, then a strip, then a cube. The 5 mm figure stays with that slice. It is not moved onto the hand plates. The shop card for this one carries the price id of the 1100 W mincer.

1100 W is not the only electric mincer. 350 W is a separate machine, not the motor of the hand mincer. The hand mincer has no watts. The two electric pages do not share one plate set, one sausage-tube list, one running-time sentence or one weight. #5, 8# and 22# stay three calibres. 2.72 kg per minute and 6.35 kg per minute stay two rates. The extra 2.72 kg line stays the line without a minute. No page adds volts, amps or hertz.

Comparison

Product Price What sets it apart
Hand meat mincer #5, 1.9 kg 88,90 € no mains, plates 4.5 and 8 mm, dishwasher
Meat mincer 1100 W, 6.35 kg/min 1 333,90 € 22#, 180 rpm, 5 mm slice, 57.5 kg

The price in the link is the shop’s current price and opens the product. The 350 W mincer, model 1A-EG808, is described in this guide, including 2.72 kg per minute, the separate 2.72 kg line, the weight of 18.2 kg, the mouth of 8# and the three sausage-tube diameters. The shop cards and this table do not carry a price id for it.

Who is this not for?

  • 2.72 kg is not a bowl. The page says 2.72 kg per minute and, separately, 2.72 kg.
  • 1100 W is not the only choice beside the hand mincer. There is also 350 W.
  • Voltage is on none of them. 230 V is not filled in.
  • A 5 mm slice is not the same as a 4.5 mm plate. Calibres #5, 8# and 22# do not interchange.

Frequently asked questions

Should you choose the hand mincer or the 1100 W?

Sometimes there is a third: 350 W and 2.72 kg per minute, at 18.2 kg. The 1100 W mincer is 6.35 kg per minute and 57.5 kg. The hand mincer is 1.9 kg with no watts. The hand page is model #5, plates 4.5 mm and 8 mm, clamp 10–45 mm, body 304 stainless, size 285 × 85 × 225 mm. The 350 W page is model 1A-EG808, mouth 8#, size 530 × 250 × 440 mm, with a separate 2.72 kg line that is not a bowl. The 1100 W page is model JQ-7F, calibre 22#, 180 revolutions per minute, a 5 mm slice, and a size of 565 × 550 × 880 mm. Choosing only between the hand and 1100 W leaves that middle page out. 350 W is its own machine. This guide does not give the 350 W mincer a price id.

Is 2.72 kg the bowl capacity?

No. The 350 W page says 2.72 kg per minute and, on a separate line, 2.72 kg. The title says 2.72 kg as well. The page does not say that 2.72 kg is the bowl capacity. The 1100 W page says 6.35 kg per minute. The page does not measure a bowl. The line without a minute is not converted into a bowl, and the per-minute line is not converted into one either. 6.35 kg per minute is a faster line on its own page, not a larger bowl than 2.72 kg. The hand page has no kilogram figure of either kind. No bowl volume is printed for #5, for 1A-EG808 or for JQ-7F.

Does more wattage grind more meat per minute?

The lines on the pages are 2.72 kg/min beside 350 W and 6.35 kg/min beside 1100 W. The hand mincer has no kilograms per minute. Those are the printed rows. They are not a rule that any higher wattage, on a machine whose page does not print a rate, grinds more meat. The hand page has no watts and no rate. Voltage is still absent. The separate 2.72 kg line, without “per minute”, is not a second rate and not a bowl. 180 revolutions per minute stay on the 1100 W page only. They are not the thing that turns 350 W into 6.35 kg/min.

What voltage is it?

No page gives volts, amps or hertz. That is not filled in as 230 V. 350 W and 1100 W are watt figures. A higher watt figure does not create a voltage the page never prints. The hand mincer has no watts, because the crank does not need current, and it still has no volts. Model 1A-EG808 does not receive a voltage from model JQ-7F. The sizes, the weights and the rates stay what they are without a volt line attached. Amps are not derived from the watts. Hertz are not derived from the 180 revolutions per minute.

Which plates are in the box?

The hand mincer has 4.5 mm and 8 mm. The 350 W kit has one 4.5 mm plate, and it does not have an 8 mm plate. That kit also has two cross blades, one of them already in the machine, a sausage-stuffing plate, three tubes, a mincing stick, a brush and a head lock. The 1100 W table says a blade of 5 mm, and the text says a slice, a strip and a cube. The 5 mm blade is not added to the hand box, and the hand’s 8 mm plate is not added to the 350 W box. The calibres stay #5, 8# and 22#, and the discs are not swapped. The stuffing plate is named only in the 350 W kit.

Is 5 mm the hole diameter?

The 1100 W text ties 5 mm to the thickness of the slice, then to a strip and a cube. The hand mincer’s 4.5 mm and 8 mm are plate holes. Those are not the same row. The 350 W page’s one 4.5 mm plate is a plate in that kit, not the 1100 W slice. 5 mm is not rewritten as a hole so that it can be set beside 4.5 mm and 8 mm. The table calls it a blade size. The prose calls it a slice thickness. Both of those stay on the 1100 W page. The clamp opening of 10–45 mm is not a hole diameter either. It is the hand clamp.

Does every mincer have a sausage tube?

The diameters are only on the 350 W page: 1.19 cm, 1.6 cm and 2.21 cm. The hand page names sausage accessories without a measure. The 1100 W page names sausage filling without a tube measure. The three outside diameters are not shared downwards onto the crank or upwards onto JQ-7F. The sausage-stuffing plate is named in the 350 W kit, together with those tubes. It is not named as a measured tube on the other two pages. A buyer who needs a printed tube diameter has that print on the 350 W page only. The other two pages still mention sausage, and they still do not give a diameter.

Do any parts go in the dishwasher?

Only the hand page says that. The 350 W mincer and the 1100 W mincer are washed with water and dried. The food-oil sentence for the blade stays on the hand page and is not copied onto the electric pages. Dishwasher is not added to 1A-EG808 because the hand page has it, and it is not added to JQ-7F. Washing with water and drying is not copied back onto the hand page as a replacement for the dishwasher sentence. Each page keeps the cleaning line it prints.

How long may it run?

The 1100 W text recommends 30 minutes of work and 10 minutes of rest. The 350 W text says continuous work and asks that a long idle be avoided, and that the machine be switched off when it is not in use. The hand page gives no time. The two electric sentences are not merged into one duty cycle. 30 minutes and 10 minutes are not written onto the 350 W page. “Continuous” is not written onto the 1100 W page. The idle warning stays with the 350 W sentence. The hand crank is not given either sentence, because that page does not print a time.

What is 180 revolutions?

Only the 1100 W page. The 350 W page and the hand page do not give revolutions per minute. 180 stays with JQ-7F, beside 6.35 kg per minute, calibre 22#, 1100 W and 57.5 kg. It is not a speed for the 8# mouth and not a speed for the #5 crank. The 350 W page’s statement that the machine can work continuously is not a revolution figure. The 30 minutes and 10 minutes on the 1100 W page are a rest recommendation, not a second speed. No other rpm is printed to put beside 180.

Does frozen meat go in all of them?

The 350 W text and the 1100 W text name frozen meat and chicken cartilage. The hand page names small bones and does not name frozen meat. Frozen meat is not added to #5. Small bones are not deleted from the hand page, and they are not pasted onto the electric pages in place of the frozen-meat line. Chicken cartilage stays on the two pages that name it. The hand food list, beef, pork, chicken, fish, vegetables and chilli, stays the hand page’s list. It is not the frozen-meat sentence.

What are they made of?

The hand mincer is 304 stainless. The 350 W mincer is stainless steel, carbon steel and plastic, the blades are SUS420, and the motor text says pure copper. The 1100 W text says a thick stainless body. 304 stainless is not rewritten as the 1100 W sentence, and “thick stainless” is not rewritten as 304. Pure copper stays on the 350 W motor text. SUS420 stays on the 350 W blades. Carbon steel and plastic stay in the 350 W list. The hand page does not receive a copper motor. The crank has no motor line. The boxes do not change these material sentences: 12.7 × 30.5 × 32.4 cm, 38 × 45.9 × 47.2 cm and 98 × 55 × 70 cm are cartons, not alloys.

How heavy are they?

1.9 kg, 18.2 kg and 57.5 kg. The boxes are 12.7 × 30.5 × 32.4 cm, 38 × 45.9 × 47.2 cm and 98 × 55 × 70 cm. 1.9 kg is the hand mincer, not the 350 W machine with the clamp left on. 18.2 kg is 1A-EG808. 57.5 kg is JQ-7F. The machine sizes stay 285 × 85 × 225 mm, 530 × 250 × 440 mm and 565 × 550 × 880 mm. The carton is not the machine. 2.72 kg and 6.35 kg per minute are rates on the pages that print them, not the weights of the machines. The separate 2.72 kg line is not a fourth weight.

Is “7.62 cm” the width of the machine?

That fragment is in the 1100 W features title. The table gives the size as 565 × 550 × 880 mm and does not repeat 7.62 cm. It is not taken as the width of the body. The body measurement used here is the table’s 565 × 550 × 880 mm. 7.62 cm is not converted into one of those three numbers, and those three numbers are not shortened to 7.62 cm. The hand size, 285 × 85 × 225 mm, and the 350 W size, 530 × 250 × 440 mm, do not contain that fragment. The fragment stays in the title where the page put it.

Autors: mano.ee komanda. Cena ceļvedī ir veikala pašreizējā cena un ved uz preci. Piegāde parasti 4–10 dienas.