Pirkšanas ceļveži

Which hedge trimmer?

Which hedge trimmer?

Short answer: Three battery hedge trimmers, not three copies of one shaft length. The low-branch model M0E-17ET-510 weighs 2.52 kg, the blade is 50.8 cm, and the size is 955 × 150 × 170 mm. The text says branches up to 1.6 cm thick. There is no rpm and there are no working minutes. The battery in the table is 2Ah, and the text says “20 V, 2 A”. The charger is 220–240 V, 50 Hz, an EU plug, slow, and one is included. The high-branch model M0E-19ET-510 weighs 3.64 kg, the blade is also 50.8 cm, the motor is 1200 rpm, and the branch is up to 1.6 cm in diameter. The text says a telescope of 1.9–2.4 m and a tilt of 30°–65.6°. The table says 1990 mm before extension and 2480 mm after extension. The title’s 2.38 m is neither of those. ET1611 weighs 3.58 kg, the blade is 45.7 cm, the cutting thickness is 1.59 cm, the height is 188–239 cm, the head is 30°–150° with five angles, and there is a shoulder strap. The text says 20 V, 2.0 Ah, a fast charger, 1 hour of charging and up to 60 minutes. Voltage and ampere-hours are not in the table. The title contains the fragment “5.08 cm-1”, which the table does not repeat.

Blade length is not shaft length

50.8 cm is the blade on the first two, not the reach. The low-branch trimmer is 955 mm long, in a size of 955 × 150 × 170 mm. That length is not a shaft. M0E-17ET-510 has no shaft row. The 50.8 cm on that card is the blade, and the 955 mm is the body size. Putting the blade figure in the place of a shaft would invent a shaft the low-branch page does not have.

The high-branch blade is the same 50.8 cm, and the body is a different row. Before extension the table says 1990 mm. After extension the table says 2480 mm. The text writes 1.9–2.4 m. 1.9 m is not 1990 mm. 2.4 m is not 2480 mm. The title writes 2.38 m. 2.38 m is not the text’s 1.9 m, it is not the text’s 2.4 m, and it is not the table’s 1990 mm or 2480 mm. Three writings stay three. They are not collapsed into one converted length. A 50.8 cm blade is not a 2.4 m shaft, and it is not a 2.38 m shaft, and it is not 2480 mm.

ET1611’s blade is 45.7 cm, not 50.8 cm. The height 188–239 cm is in the text and in the table, and that row agrees. The product-size row is a different row: “34.45±0.4 x 3.94±0.2 x 5.91±5.08 mm/875±10 x 100±6 x 150±6 mm”. The two writings in that row are not put together as one number. The height row that agrees, 188–239 cm, stays the height row. The size row with the tolerances stays the size row. Neither row is the 50.8 cm blade from the other two cards.

1.6 cm and 1.59 cm are not the same cut. The low-branch text says branches up to 1.6 cm thick. The high-branch 50.8 cm text says up to 1.6 cm in diameter. ET1611 says a cutting thickness of 1.59 cm. Thickness and diameter are the page’s words, not one measurement. The low card’s word is thick. The high card’s word is diameter. ET1611’s words are cutting thickness. Those three stay on the cards that use them. 1.6 cm is not rewritten as 1.59 cm, and 1.59 cm is not rewritten as 1.6 cm.

Revolutions and minutes are not on every card

1200 rpm is on the high-branch 50.8 cm page and on the ET1611 page. The low-branch page has no rpm. ET1611 says a pure copper motor. The other two cards do not carry that sentence. Watts on the tool are not on any of the three. A watt figure is not added to fill the empty place. The table voltage is 20 V DC on the first two. ET1611’s text says 20 V. The voltage row is absent from the ET1611 table, so voltage stays off that table.

Working minutes are only on ET1611: up to 60 minutes, charging of 1 hour, and a fast charger. The low-branch card says “a long working time” and does not give a minute. The high-branch 50.8 cm card says “a whole day” and does not give a minute. Those sentences are not converted into 60 minutes. “A long working time” stays the low-branch sentence. “A whole day” stays the high-branch sentence. Up to 60 minutes stays the ET1611 sentence. The page does not supply the arithmetic that would turn a day, or a long time, into the 60 on the third card.

The battery table says 2Ah and a quantity of 1 on the first two. The low-branch text says “2 A”. The high-branch text says “2A”. ET1611’s text says 2.0 Ah, and the ampere-hour row is not in that table. “2 A”, “2A”, 2Ah and 2.0 Ah are not added together into one battery. “Built-in” is only a word in the high-branch 50.8 cm text. The same page’s table says a battery quantity of 1 and a charger included. That contradiction stays. The table’s quantity and the text’s “built-in” are both left as the page left them.

Angle and the switch

The low-branch card has no angle. The high-branch 50.8 cm card has 30°–65.6°. ET1611’s head turns from 30° to 150°, in five angles, and the page also names a low lawn. Five angles are not the 65.6° row. 30°–65.6° stays on M0E-19ET-510. 30°–150° and the five angles stay on ET1611. The low lawn is named on the ET1611 page. It is not a centimetre of hedge, and it is not the type-row words “low branch”. The shoulder strap is only on ET1611. The first two cards do not state one.

A sliding blade guard for storage is only on the high-branch 50.8 cm card. ET1611’s protective cover is the page’s sentence about water and rust resistance. That sentence is not the sliding storage guard. The low-branch card does not name that cover. The guard, the cover sentence, and the card that names neither stay as three different statements.

A two-switch requirement is on all three, and the wording is not one wording. The low-branch card says the tool runs only when both switches are pressed at the same time. The high-branch 50.8 cm card says the two-switch design prevents an accidental start. ET1611 says a main switch and an auxiliary handle, and that the blade stops immediately when one switch is released. “Stops immediately” is only on that page. The three sentences stay three sentences. They are not rewritten as a single switch instruction.

Weight and the box

2.52 kg is the low-branch trimmer. 3.64 kg is the long 50.8 cm shaft. 3.58 kg is the 45.7 cm shaft. The shorter blade is not the lighter shaft: 3.58 kg is only 0.06 kg lighter than 3.64 kg, and the blade is 5.1 cm shorter. 2.52 kg stays on M0E-17ET-510, with the 955 × 150 × 170 mm body and no shaft. 3.64 kg stays on M0E-19ET-510, with 1200 rpm and the three length writings. 3.58 kg stays on ET1611, with the 45.7 cm blade, the 1.59 cm cut and up to 60 minutes.

The boxes are 20.0 × 17.0 × 94.5 cm, 18.0 × 17.0 × 111 cm and 17.5 × 16.0 × 100 cm. The longest box is the one on the 50.8 cm shaft.

Charger voltage of 220–240 V and slow charging are on the first two, with 50 Hz, an EU plug, and one charger included. ET1611 says a fast charger and 1 hour. Wall-socket volts are not in the ET1611 table, so those volts stay off that table. The page does not measure oil, it does not measure cord length while working, and it does not measure hedge height in metres beyond the shaft itself. “Low branch” and “high branch” are the type row, not a hedge centimetre. No oil ratio, no cord length, and no hedge centimetre is added.

How to choose

Choose M0E-17ET-510 when the branch type is low, the blade is 50.8 cm and the weight is 2.52 kg, and the page has no rpm and no minutes. The size is 955 × 150 × 170 mm. That 955 mm is the body, not a shaft. The battery is 2Ah in the table, quantity 1, and the text says “20 V, 2 A”. The charger is 220–240 V, 50 Hz, an EU plug, slow, one included, with no charging time given. The branch sentence is up to 1.6 cm thick. There is no angle. The working sentence is “a long working time”, without a minute. Both switches have to be pressed at the same time.

Choose M0E-19ET-510 when the blade is 50.8 cm and the page says 1200 rpm and a telescope. The weight is 3.64 kg. The text says 1.9–2.4 m. The table says 1990 mm before extension and 2480 mm after. The title says 2.38 m. Those three stay. The angle is 30°–65.6°. The branch sentence is up to 1.6 cm in diameter. The text says “2A” and also “built-in”. The table says 2Ah, battery quantity 1, and a charger included. The working sentence is “a whole day”, without a minute. The two-switch design is described as preventing an accidental start. The sliding blade guard for storage is on this card.

Choose ET1611 when the blade is 45.7 cm, the cut is 1.59 cm and the height is 188–239 cm, and the page says up to 60 minutes. The weight is 3.58 kg. The height row agrees between the text and the table. The size row is the other writing, “34.45±0.4 x 3.94±0.2 x 5.91±5.08 mm/875±10 x 100±6 x 150±6 mm”, and the two sides of that row stay two writings. Voltage is in the text, as 20 V, and it is not in the table. The text also says 2.0 Ah, a fast charger, and 1 hour of charging. The head is 30° to 150° in five angles, and the page names a low lawn. The shoulder strap is here. The motor sentence says pure copper. Releasing one switch, the blade stops immediately. “5.08 cm-1” is in the title and is not in the table.

1.6 cm is not 1.59 cm. A 50.8 cm blade is not the shaft length. “5.08 cm-1” is a fragment of the ET1611 title. The table does not repeat it. 2 A and 2Ah stay the writings the cards use. 60 minutes stays on ET1611.

Comparison

Product Price What sets it apart
Hedge trimmer 50.8 cm, 2.52 kg, low branch 127,90 € no rpm, slow charger, no angle
Shaft 50.8 cm, 3.64 kg, 1200 rpm 155,90 € 1.9–2.4 m in the text, 1990/2480 mm in the table
Shaft 45.7 cm, 3.58 kg, up to 60 min 163,90 € 1.59 cm cut, 30–150°, shoulder strap, fast charger in the text

The price in the link is the shop’s current price, and the link opens the product.

Who this does not suit

  • 50.8 cm is not the shaft length. The low-branch body is 955 mm. The long shaft is 1990 mm or 2480 mm in the table.
  • The title’s 2.38 m does not correct the text’s 2.4 m or the table’s 2480 mm. 1.9 m, 2.4 m, 2.38 m, 1990 mm and 2480 mm stay the figures the page printed.
  • 60 minutes is only on ET1611. “A whole day” is not 60 minutes. “A long working time” is not 60 minutes either.
  • “5.08 cm-1” and the size row’s ±5.08 are not the blade length. The blade is 45.7 cm. The two writings in the size row are not one number.

Frequently asked questions

How long is the blade?

50.8 cm on the first two, M0E-17ET-510 and M0E-19ET-510. 45.7 cm is ET1611. The blade length is not the shaft length. On the low-branch card the body size is 955 × 150 × 170 mm, and that card has no shaft. On the high-branch card the shaft writings are separate from the 50.8 cm blade.

How long is the shaft?

The low-branch trimmer has no shaft. Its size is 955 × 150 × 170 mm. The second card’s text says 1.9–2.4 m, the table says 1990 mm before extension and 2480 mm after, and the title says 2.38 m. ET1611 is 188–239 cm in the text and in the table. 1.9 m is not 1990 mm. 2.4 m is not 2480 mm. 2.38 m is neither. The three figures on M0E-19ET-510 stay three figures.

Why are there three lengths on one page?

On M0E-19ET-510 the text, the table and the title do not match. The text is 1.9–2.4 m. The table is 1990 mm and 2480 mm. The title is 2.38 m. 1.9 m is not 1990 mm. 2.4 m is not 2480 mm. 2.38 m is not either of those. All three stay. They are not replaced by one converted length. The 50.8 cm on that page is the blade.

How thick a branch does it cut?

The low-branch card says up to 1.6 cm thick. The high-branch 50.8 cm card says up to 1.6 cm in diameter. ET1611 says a cutting thickness of 1.59 cm. The words are not one row. Thickness, diameter and cutting thickness stay the words the cards use. 1.6 cm is not 1.59 cm.

Do all of them have 1200 rpm?

No. 1200 rpm is on the high-branch 50.8 cm card and on ET1611. The low-branch card has no rpm. ET1611 also says a pure copper motor, and the other two cards do not say that. Watts on the tool are not on any of the three.

How long does the battery last?

Only ET1611 says up to 60 minutes. The low-branch card says a long working time and does not give a minute. The high-branch card says a whole day and does not give a minute. Those sentences are not turned into 60 minutes.

How long does charging take?

1 hour and a fast charger are only in the ET1611 text. The first two have a slow charger, 220–240 V, 50 Hz, an EU plug, one included, and they do not give a time. Wall-socket volts are not in the ET1611 table.

What are 2 A and 2Ah?

The table says 2Ah on the first two, with a quantity of 1. The low-branch text says “2 A”. The high-branch text says “2A”. ET1611’s text says 2.0 Ah, and that row is not in the table. They are not combined into one figure. “2 A” and 2Ah stay different writings on the cards that use them.

Is the battery built in?

“Built-in” is only the high-branch 50.8 cm page’s text. The same page’s table says a battery quantity of 1 and a charger included. The contradiction stays. The other cards do not use the word “built-in”.

What is the angle?

The low-branch card has no angle. 30°–65.6° is on the 50.8 cm shaft. 30°–150°, stated as 30° to 150°, and five angles, are on ET1611. Five angles are not the 65.6° row. ET1611 also names a low lawn. That name is not a hedge height in centimetres.

Does every one have a shoulder strap?

No. Only ET1611. The sliding blade guard for storage is only on the 50.8 cm shaft. ET1611’s protective cover is the sentence about water and rust resistance. The low-branch card does not name that cover.

Which one is heavier?

3.64 kg is the long 50.8 cm shaft. 3.58 kg is the 45.7 cm shaft. 2.52 kg is the low-branch trimmer. The shorter blade does not make the shaft light: 3.58 kg is only 0.06 kg lighter than 3.64 kg, and the blade is 5.1 cm shorter.

What is “5.08 cm-1”?

It is a fragment of the ET1611 title. The table does not repeat that figure. The blade row is 45.7 cm. The size row has two separate writings, with the tolerances: “34.45±0.4 x 3.94±0.2 x 5.91±5.08 mm/875±10 x 100±6 x 150±6 mm”. The fragment and the ±5.08 in that row are not the blade length, and the two writings are not one number.

Is the voltage in the table?

20 V DC is in the tables of the first two. ET1611 says 20 V in the text. The voltage row is absent from the ET1611 table, so voltage stays off that table. Ampere-hours are absent from that table as well. The text’s 2.0 Ah stays in the text.

Autors: mano.ee komanda. Cena ceļvedī ir veikala pašreizējā cena un ved uz preci. Piegāde parasti 4–10 dienas.