Pirkšanas ceļveži

Which chainsaw?

Which chainsaw?

Short answer: Three saws, and only two of them burn petrol. OO-2500A is a 2-stroke. The displacement is 25.4 cm³. The power is 1 hp / 0.75 kW, and the speed row repeats 0.75 kW together with 8500 r/min and a maximum of 11500 r/min. The guide bar in the table is 304.8 mm. The text says a 30.5 cm guide bar and a cut of up to about 25.0 cm. 304.8 mm, 30.5 cm and about 25.0 cm stay as three writings. 25.4 cm³ is the displacement, not the 25.0 cm thickness. The mix is 40:1. Fuel is 230 ml. Chain oil is 160 ml. The weight is 4.2 kg. Model 4000 is 40 cm³ and 1.8 hp / 1.3 kW. The guide bar is 355 mm. A separate row says 40cc – 35.6 cm. The cutting diameter is 300 mm. 355 mm, 35.6 cm and 300 mm stay. The speed is 8500 r/min and the maximum is 12000 r/min. The weight is 5.6 kg. A 2-stroke row is not on that page. ET2008 is a mini chainsaw with a battery, the 20 V pole saw of the three. The voltage is 20 V and the capacity is 2 Ah. The cutting thickness is 12.7 cm. The motor speed is 22000 RPM and the text says up to 5.79 m/s. The length is 1.08–2.43 m and the text says up to 2.44 m. The weight is 2.5 kg. There is no horsepower and no cm³.

304.8 mm, 30.5 cm and about 25.0 cm are not one bar

The OO-2500A table lists the guide bar as 304.8 mm. The title repeats 304.8 mm. The text says a 30.5 cm guide bar. The page does not write 304.8 mm as the figure 30.5 cm, and this guide does not convert one into the other. The cut is up to about 25.0 cm. The word “about” stays, because the page writes it. 25.0 cm is not the guide-bar row. 25.0 cm is not the displacement. The displacement is 25.4 cm³. A cubic centimetre and a centimetre of cut are different writings, and 25.4 does not replace 25.0.

The chain is 9.53 mm and 45 links, and that pair is only on this page. It is not written onto model 4000, and it is not written onto ET2008. The body size without the guide bar is 265 × 220 × 220 mm. There is no colour on this page. The engine type is 2-stroke. The other two pages do not have that type row. Model 4000 is a petrol saw, and its page still has no 2-stroke row. ET2008 is the battery saw, and its page has no 2-stroke row either.

Power on OO-2500A is 1 hp / 0.75 kW. The speed row on the same page repeats 0.75 kW together with 8500 r/min and a maximum of 11500 r/min. That repeated 0.75 kW belongs to this speed row. The mix on this page is 40:1. Fuel is 230 ml and chain oil is 160 ml. The weight is 4.2 kg. Those fuel, oil and mix lines are this petrol saw’s lines.

355 mm, 35.6 cm and 300 mm are three writings

The guide-bar row on model 4000 is 355 mm. The row named displacement and guide-bar size says 40cc – 35.6 cm. That line stays as written: 40cc – 35.6 cm. The title says 35.6 cm. The text says a 355 mm bar and a cut of up to 300 mm. The table’s maximum cutting diameter is 300 mm. The page does not turn 355 mm into 35.6 cm. The page does not turn 300 mm into the length of the bar. 300 mm is the cutting diameter. The bar lengths the page does write are the 355 mm guide-bar row and the 35.6 cm inside 40cc – 35.6 cm. Three writings stay: 355 mm, 35.6 cm and 300 mm.

The power is 1.8 hp / 1.3 kW. The speed is 8500 r/min and the maximum is 12000 r/min. 8500 is the same number as on the smaller petrol saw. The maximum is not the same number: on OO-2500A the maximum is 11500 r/min, and on model 4000 it is 12000 r/min. Fuel is 310 ml and chain oil is 210 ml. The mix is 40:1 on this page as well. The colour is orange and black. The material is PA6 + 30% GP, and the table also names ADC aluminium. There is no body size in millimetres on this page, so the 265 × 220 × 220 mm of OO-2500A is not copied here. The 2-stroke type row is not copied here either.

40 cm³ on model 4000 is the displacement in the prose of that page. 40cc inside the line 40cc – 35.6 cm is the writing that row uses. Both stay. Neither of them is 25.4 cm³, and neither of them is the 300 mm cutting diameter. The weight on this page is 5.6 kg.

5.08 cm-1 is not a 12.7 cm cut

The ET2008 title contains the fragment 5.08 cm-1. The type row repeats Mini chainsaw 5.08 cm-1. The cutting-thickness row is 12.7 cm. The fragment is not that thickness. The page does not give the fragment its own centimetre apart from the fragment as printed. 5.08 cm-1 is not rewritten as 12.7 cm, and 12.7 cm is not rewritten as 5.08 cm-1. There is no guide-bar figure in millimetres on this page. 304.8 mm and 355 mm belong to the petrol saws. They are not placed on ET2008.

The battery is 20 V and 2 Ah. There is no watt figure. The text says a speed of up to 5.79 m/s, and the table says a motor speed of 22000 RPM. Those are different units, and both stay on the lines that use them. 22000 RPM is not written as 5.79 m/s, and 5.79 m/s is not written as a revolution figure. The length in the table is 1.08–2.43 m. The text says a maximum extension of up to 2.44 m. 2.43 m and 2.44 m both stay. The page does not pick one and drop the other. 7 angles is a sentence, and the sentence gives no degrees. Automatic oiling is a sentence, and the sentence gives no millilitres. There is no horsepower on this page and no cm³.

This is the 20 V pole saw. It is not a third petrol saw. The mix 40:1 is not on this page. The fuel amounts 230 ml and 310 ml are not on this page. The chain-oil amounts 160 ml and 210 ml are not on this page. What this page says about oil is the sentence on automatic oiling, without a millilitre figure.

What only one saw states

The small petrol saw names oak and maple, and it names home and a small farm. The larger petrol saw names home and professional logging, and it names an emergency stop. The small one has a guard plate and a switch. It does not have an emergency-stop lever. The battery pole saw names branches, low brush and wood, and it names a telescope without a ladder. The word firewood is not on these pages. Oak and maple stay on OO-2500A. Professional logging and the emergency stop stay on model 4000. Branches, low brush, wood and the telescope stay on ET2008.

The weights are 4.2 kg, 5.6 kg and 2.5 kg. The lightest is the battery saw, not the smaller petrol saw. OO-2500A at 4.2 kg is lighter than model 4000 at 5.6 kg, and ET2008 at 2.5 kg is lighter than both. The packages are 27.0 × 28.0 × 32.5 cm, 31.0 × 26.0 × 52.0 cm and 17.0 × 16.0 × 144 cm, in that order for OO-2500A, model 4000 and ET2008. 144 cm is the package of ET2008. It is not the saw length of 1.08–2.43 m, and it is not the text’s extension of up to 2.44 m. There is no IP class on these pages and no figure in decibels.

An emergency stop is not shared. Model 4000 is the page that names it. OO-2500A names a guard plate and a switch instead of an emergency-stop lever. The battery saw is the page with a tension lock, which is a different sentence from the emergency stop. The 40:1 mix is stated on the two petrol pages and is absent from the battery page. The 2-stroke row is stated only on OO-2500A.

How to choose?

If the saw is a 2-stroke, 25.4 cm³ and 1 hp / 0.75 kW, with a guide bar of 304.8 mm and a text figure of 30.5 cm, that is OO-2500A. The cut is about 25.0 cm. The weight is 4.2 kg. The mix is 40:1. Fuel is 230 ml and chain oil is 160 ml. The chain is 9.53 mm and 45 links. The speed row carries 0.75 kW with 8500 r/min and a maximum of 11500 r/min. The body without the guide bar is 265 × 220 × 220 mm. The page names oak and maple, home and a small farm, a guard plate and a switch.

If the saw is 40 cm³ and 1.8 hp / 1.3 kW, with a bar of 355 mm and the row 40cc – 35.6 cm, that is model 4000. The cut is 300 mm, and 300 mm is the cutting diameter, not the bar length. The weight is 5.6 kg. The colour is orange and black. The material is PA6 + 30% GP and ADC aluminium. Fuel is 310 ml and chain oil is 210 ml. The mix is 40:1. The speed is 8500 r/min and the maximum is 12000 r/min. The page names home, professional logging and an emergency stop. It does not name a 2-stroke row.

If the saw is 20 V and 2 Ah, with a cut of 12.7 cm and a length of 1.08–2.43 m, and the text says up to 2.44 m, that is ET2008. The weight is 2.5 kg. The fragment 5.08 cm-1 is not the cut. The motor speed in the table is 22000 RPM. The text speed is up to 5.79 m/s. 7 angles are given without degrees. Oiling is automatic, without millilitres. The page names branches, low brush, wood and a telescope without a ladder. It does not name firewood.

25.4 cm³ is not 25.0 cm. 30.5 cm is not 304.8 mm. 355 mm is not 35.6 cm. 2.43 m is not 2.44 m. The line 40cc – 35.6 cm stays as written. Two of the saws are petrol. One is the 20 V pole saw.

Comparison

Product Price What sets it apart
OO-2500A, 304.8 mm and 30.5 cm 146,90 € 1 hp / 0.75 kW, about 25.0 cm, 4.2 kg
ET2008, 20 V, cut 12.7 cm 196,90 € 2.43 m and 2.44 m, 2.5 kg, 5.79 m/s

The price in the link is the shop’s current price and opens the product.

Who is this not for?

  • Two saws are petrol. One is a 20 V battery. The word firewood is not on the page.
  • 304.8 mm and 30.5 cm both stay. About 25.0 cm is not the bar, and it is not 25.4 cm³.
  • 355 mm, 35.6 cm and 300 mm stay as three writings.
  • 5.08 cm-1 is a fragment of the title and of the type row. The cut is 12.7 cm. 2.43 m and 2.44 m both stay.

Frequently asked questions

Are all three petrol saws?

No. OO-2500A and model 4000 are petrol. ET2008 is a 20 V and 2 Ah battery.

What is the difference between 25.4 cm³ and 25.0 cm?

25.4 cm³ is the displacement of OO-2500A. About 25.0 cm is the sentence on cut thickness. The guide bar is 304.8 mm, and the text says 30.5 cm.

Is 30.5 cm the same as 304.8 mm?

The page writes both and does not convert. The table and the title are 304.8 mm. The text is 30.5 cm.

What is 40cc – 35.6 cm?

It is the value of a row on model 4000. A separate guide bar is 355 mm. The cut is 300 mm. The three writings stay.

Is 300 mm the bar length?

No. 300 mm is the maximum cutting diameter. The bar is 355 mm, and 35.6 cm is on the row 40cc – 35.6 cm.

What is the power?

OO-2500A is 1 hp / 0.75 kW. Model 4000 is 1.8 hp / 1.3 kW. ET2008 is 20 V and 2 Ah, with no horsepower.

What is the speed?

The petrol saws: 8500 r/min, and a maximum of 11500 r/min or 12000 r/min. The battery saw: 22000 RPM, and in the text up to 5.79 m/s.

Is the mix 40:1 on all of them?

40:1 is on the two petrol saws. The battery saw has no mix row. The 2-stroke row is only on OO-2500A.

How much fuel and oil?

OO-2500A: fuel 230 ml, oil 160 ml. Model 4000: fuel 310 ml, oil 210 ml. The battery saw has automatic oiling, with no millilitres.

What is 5.08 cm-1?

The fragment is in the ET2008 title and in the type row. The cutting thickness is a separate 12.7 cm. The fragment is not the bar length.

How long is the pole saw?

The table says 1.08–2.43 m. The text says up to 2.44 m. Both stay. 7 angles are given with no degrees.

Does the battery saw cut only branches?

The text names wood, low brush and branches. The cutting thickness is 12.7 cm. The word firewood is not there.

Does every saw have an emergency stop?

No. The stop lever is on model 4000. OO-2500A has a guard plate and a switch. The battery saw has a tension lock.

Which is the lightest?

ET2008 is 2.5 kg. OO-2500A is 4.2 kg. Model 4000 is 5.6 kg.

Is 144 cm the length of the saw?

No. 17.0 × 16.0 × 144 cm is the ET2008 package. The saw length is 1.08–2.43 m, and the text says up to 2.44 m.

Autors: mano.ee komanda. Cena ceļvedī ir veikala pašreizējā cena un ved uz preci. Piegāde parasti 4–10 dienas.